Cleaning The Coupled Feed Roller; Cleaning The Mirror - Fujitsu M3097E Plus Operator's Manual

5.3.3 Cleaning the coupled feed roller

NOTICE

5.3.4 Cleaning the mirror

5 – 4
1 Pull the ADF lever up to open the ADF.
2 Pull the ADF lamp replacement lever up while pushing the lever
in the direction indicated by the arrow in Figure 5.4.
3 Clean the surface of the coupled feed roller by the cloth with
ethyl alcohol.
If the coupled feed rollers are excessively pushed in the direction of
the arrow above during cleaning, the automatic document feed
performance may be affected.
1 Cleaning the mirror:
Remove the glass plate from the automatic document feeder with
the same procedure as that for lamp replacement. Do not move
the carrier unit during work. Dust may fall on the mirror. When
installing the lamp unit, if the automatic document feeder and
mirror are dirty, clean them before final installation and before
putting the glass plate back on.
2 How to clean the mirror:
Wipe the mirror using the blower. When the mirror is very dirty,
use a dry cloth or a cloth with alcohol. If the mirror is strongly
wiped or dirty cloth is used, the mirror may be damaged.