Chapter 5 Maintenance; Removing Jammed Documents; Figure 5.1 Removing Jammed Documents - Fujitsu M3097E Plus Operator's Manual

CHAPTER 5 MAINTENANCE

5.1 Removing Jammed Documents

5.2 Notes on Daily Use
5.3 Cleaning
5.4 Replacing the Lamp Unit
5.5 SCSI Address Setting (M3097G+)
5.6 Replacing the Pad
5.7 Document counter display and reset
This section explains how to remove jammed documents, and provides notes on daily use and
cleaning.
If "Please clean-up!!" is displayed on the operator panel during the read operation, clean the
mirror as explained in Section 5.3.4.
If "Please clean Pick-roller" is displayed, clean the pick roller as explained in Section 5.3.2.
5.1 Removing Jammed Documents
Automatic document feeder (ADF)
If documents jam while being fed by the ADF, remove the jammed
documents as follows:
1 Remove the documents from the ADF paper chute.
2 Pulling up the ADF lever, open the automatic document feeder.
3 Remove the jammed documents.
4 Close the ADF to the ADF lever.
ADF lever

Figure 5.1 Removing jammed documents

5 – 1