Notes On Daily Use; Cleaning; Cleaning The Document Cover, Document Holding Pad, And Document Bed; Figure 5.2 Cleaning The Document Cover, Document Holding Pad, And Document Bed - Fujitsu M3097E Plus Operator's Manual

5.2 Notes on Daily Use

IMPORTANT

5.3 Cleaning

5.3.1 Cleaning the document cover, document holding pad, and document bed

NOTICE
Document cover
Document holding pad

Figure 5.2 Cleaning the document cover, document holding pad, and document bed

5 – 2
Note the following points on daily use:
• The image scanner requires one to three minutes to warm up after
the power has been turned on. During this time, the message
"Warming-up Now!!" is displayed on the screen.
• Do not look directly at the light source during the read operation.
Keep the document cover in place.
• See Section 5.3 "Cleaning", to clean the document cover, document
holding pad, document bed, and the automatic document feeder.
Especially, clean the ADF periodically. For cleaning cycle, see
Section 5.3.2 "Cleaning the ADF".
This section explains how to clean the image scanner.
• Use a dry cloth or a cloth with a neutral cleanser or ethyl alcohol to
remove dirt from the document cover, document holding pad, and
document bed.
Do not use organic solvents such as a thinner.
• Make sure that no liquid enters the scanner from the edges of the
document bed glass.
Cloth
Document bed
Neutral cleanser
or ethyl alcohol
Thinner