Reading Documents In Adf Mode - Fujitsu M3097E Plus Operator's Manual

4.3 Reading Documents in ADF Mode

This section explains how to read documents using the automatic
document feeder. If the following steps are not closely followed, a
feed error may occur.
After documents have been read in ADF mode, a squeaking noise is
sometimes heard. This is not a problem as the noise is caused by the
self-cleaning action of the rollers.
1 Check the documents as follows:
(a) Paper quality
• Wood-free paper.
• PPC paper; Specified by XEROX Corporation.
(b) Paper weight
• 13.9 lbs to 34 lbs
(c) Paper size
• Letter, Double Letter, Legal, A3, A4, A5, B4, B5, B6, A6
(d) Items to avoid
• The following paper cannot be fed by ADF appropriately.
– Paper with a clip or staple.
– Paper that has ink that is not dry.
– Paper thickness is not constant, such as an envelope.
– Paper that has large rumples or curl.
– Paper that has folds or tears.
– Tracing paper.
– Coating paper.
– Carbon paper.
– Paper that is smaller than A6 size or larger than A3
width.
– Items other than paper, such as clothes, metal sheet, or
OHP film.
– Photographic paper.
– Paper that has perforations on its side.
– Paper that has a shape other than square.
– Paper that is very thin.
4 – 5