Cleaning The Adf; Figure 5.3 Cleaning The Adf - Fujitsu M3097E Plus Operator's Manual

5.3.2 Cleaning the ADF

ADF lever
Pad
Automatic document feeder
Guide shaft (white part)
Clean the ADF once every 5,000 pages. The cycle depends on the
types of documents used (page quality, a level of toner fusing on
paper).
1 Pull the ADF lever up to open the ADF.
2 Use the dry cloth or a cloth with ethyl alcohol to softly remove
dirt and dust as follows.
Pad:
Glass:
Pick rollers (two): Wipe the rollers softly. Be careful not to
Feed roller and coupled feed roller:
Ejection roller and coupled ejection roller:
Guide shaft (white part):
3 Close the ADF to lock the ADF lever.
Feed roller
Pick spring

Figure 5.3 Cleaning the ADF

Wipe the pad in a downward direction (indi-
cated by the arrow). Be careful not to hook
the pick spring when wiping.
Wipe the glass lightly. See Section 5.4,
"Replacing the Lamp Unit" to clean the
bottom of the glass.
damage the surface of the rollers. If the toner
adheres to the roller, it may affect the paper
feed performance. Clean the rollers well.
Wipe the rollers softly. Be careful not to
damage the surface of the rollers. If the toner
adheres to the roller, it may affect the paper
feed performance. Clean the rollers well. For
details of the coupled feed roller, see Section
5.3.3.
Wipe the rollers softly. Be careful not to
damage the surface of the rollers. If the toner
adheres to the roller, it may affect the paper
feed performance. Clean the rollers well.
Wipe the guide shaft softly.
Ejection roller (Clean the roller
on the opposite side also.)
Glass
Pick rollers
Coupled feed roller
(See section 5.3.3)
5 – 3