Fitting A Vtr - Sony DXC-D35H/D35PH Operating Instructions Manual

Fitting a VTR

This section explains how to attach the DSR-1/1P to
the camera head. The method for attaching a PVV-3/
3P is similar.
1
Set the PRO 76-pin DIGITAL
connector on the DSR-1/1P.
(The camera connector on the
PVV-3/3P is PRO 50-pin.)
For details, see the operating
instructions for the DSR-1/1P.
2
Loosen the two screws and
remove the shoulder pad.
3
Align the projection on the
bottom of the DSR-1/1P with
the slot on the camera head.
When replacing the camera head grip with a camcorder
grip, see "Using the Camcorder Grip" (page 27).
Camera head
DSR-1/1P
Camera connector
(PRO 76-pin DIGITAL)
Screws
Slot
Projection
Groove
Chapter 2 Fitting and Connections
(continued)
25