Sony DXC-D35H/D35PH Operating Instructions Manual page 66

Viewfinder Advanced Menu
Item
VF TALLY
Selects whether or not to use
more than one REC/TALLY
indicators in the viewfinder
(displayed only when the
DXF-701/701CE/701WS/
701WSCE/801/801CE
viewfinder is attached).
VF PLAY
Selects the video signal
displayed in the viewfinder
during playback of the DSR-
1/1P (displayed only when
the DSR-1/1P is connected)
LENS SEL
Selects the types of the lens.
Advanced menu page 5
Item
a)
SS IND
Selects the mode for
showing the shutter setting
when displaying the normal
indications.
a)
LL IND
Selects whether or not to
show the LOW LIGHT
indication on the normal
indications when inadequate
lighting is detected.
MIC IND a)
Selects whether or not to
show the camera
microphone output
indication on the normal
indications.
a)
IRIS IND
Selects whether or not to
show the lens's F-stop value
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
66
Chapter 4 Viewfinder Screen Indications and Menus
Settings
1: Uses only the upper
REC/TALLY indicator.
2 (normal value): Uses
two REC/TALLY indicators.
Y (normal value): Y signal
VBS: Composite video
signal
1 (normal value), 2, 3, 4
For details, see "Designating
the lens" on page 90.
Settings
3SEC: Displays shutter
setting for three seconds only
when the setting has been
changed.
ALWAYS (normal value):
Displays the shutter setting at
all times.
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.
Item
GAIN IND a)
Selects whether or not to
always show the gain
setting indication on the
normal indications.
FILTER IND a)
Selects whether or not to
always show the FILTER
knob setting indication on
the normal indications.
The FILTER knob setting
indicator is always displayed
when in EZ mode.
WHITE IND a)
Selects whether or not to
show the setting of the white
balance switch.
SKIN IND a)
Selects whether or not to
show the setting for skin
detail correction.
a) When the viewfinder's DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
Advanced menu page 6
Item
AUDIO IND a)
Selects whether or not to
show the audio level
indication on the normal
indications (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
TAPE IND a)
Selects whether or not to
show the VTR's remaining
tape indication on the normal
indications. (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
a) When the viewfinder's DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
Settings
ON (normal value): Always
displays.
OFF: displays for two
seconds only when the
setting has been changed.
ON (normal value): Always
displays.
OFF: Displays for two
seconds only when the
setting has been changed.
ON (normal value): Displays.
OFF: Not display.
ON (normal value): Displays.
OFF: Not display.
Settings
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.