Viewfinder Basic Menu; Basic Menu Operations; Contents And Settings Of Each Page - Sony DXC-D35H/D35PH Operating Instructions Manual

Viewfinder Basic Menu

To display the basic menu pages, press the MENU/
STATUS switch downward while the normal
indications are being shown in the viewfinder. The
basic menu configuration can include up to eight pages
(the configuration depends on the switch settings and
the type of connected VTR).

Basic Menu Operations

The common operations on all basic menu pages are
described below.
To change the page or item
The cursor is moved downward each time you press
the MENU/STATUS switch down. Once the cursor
has reached the last item on a page, press down the
MENU/STATUS switch to go to the next page. When
the last page is being displayed, pressing down the
MENU/STATUS switch returns the display to the
normal indications.
The cursor is moved upward each time you press up
the MENU/STATUS switch. Once the cursor has
reached the first item on a page, pressing up the
MENU/STATUS switch returns the display to the
normal indications.
To change settings
After using the MENU/STATUS switch to move the
cursor to the item on which you will change the
setting, press either the UP/ON button or the DOWN/
OFF button to select the desired value.
To reset any item to its shipped settings, press the UP/
ON button and the DOWN/OFF button at the same
time.
58
Chapter 4 Viewfinder Screen Indications and Menus
Contents and Settings of Each
Page
Each page's contents and settings are described below.
On the DXC-D35WSL/D35WSPL, when the MENU
MODE is set to 2 in advanced menu page 9, a page for
aspect ratio settings (16:9/4:3) is added before basic
menu page 1.
Basic menu page 1
Item Settings
A. IRIS –1.0, –0.5, ±0 (normal value), +0.5,
Sets a base value +1.0
for auto adjustment Negative adjustment values set a
of lens iris. narrower lens iris and positive values
set a wider lens iris.
DTL LEV –99 to ±0 (normal value) to +99
Sets the detail Negative adjustment values soften the
(edge) emphasis. image's edges and positive values
sharpen them.
M. BLACK –99 to ±0 (normal value) to +99
Sets the master Negative adjustment values make
pedestal level. dark areas of the picture darker and
increase the contrast. Positive
adjustment values dark areas of the
picture lighter and reduce the
contrast.
STRETCH –16 to ±0 (normal value) to +15
Sets black stretch/ This function adjusts the intensity of
compress value. dark areas of the screen. Negative
values make these areas darker
(black compress) and positive values
make these areas brighter (black
stretch).
SHUTTER DXC-D35/D35WSL: 1/100 (normal
Sets shutter speed value), 1/250, 1/500, 1/1000, 1/
or CLS/EVS setting 2000, EVS, CLS (60.4 Hz to 200.3
(see page 84) .
Hz)
DXC-D35P/D35WSPL: 1/60 (normal
value), 1/250, 1/500, 1/1000, 1/
2000, EVS, CLS (50.3 Hz to 201.4
Hz)
This selects either the shutter speed
or the scan frequency or EVS for the
clear scan function.