Advertisement
Quick Links
FEATURES:
• 1/2.8" Sony® STARVIS 2.1 MegaPixel CMOS Sensor
• 2.1 MegaPixel with Full 1080p/720p HD/EX-SDI 1.0, 2.0 / TVI / AHD / CVI
/ CVBS Output
• Advanced Starlight Technology Offers Dramatically Higher Sensitivity to Light
Producing Color Images in Very Dark & Night Scenes
• MegaPixel IR Corrected 2.8~12mm Motorized Varifocal Lens with 1 click
focus for easy Configuration
• 30 Dynamic Infrared LEDs at 850nm enable viewing in total darkness up to
100 feet
• Dual Glass Compartments to Eliminate IR Reflection
• 3D-DNR Digital Noise Reduction
• True Day/Night by ICR - Dual Filter Switch
• Fully programmable True WDR (Dual Scan)
• ROI (Region of Interest) WDR achieves superior exposure compensation
specifically in exact areas of interest while reducing HDD storage space
• Secondary Video Output & OSD Control Joystick are accessible inside a
gasket sealed removable side panel
• Advanced OSD Functions: Motion Detection, Privacy Mask, Defog, Sens-
up(~x32), Sharpness, Mirror/Flip, BLC/HLC, Deblur, Anti-Saturation, Title
Set, D-WDR
• 3-Axis mount with Simple One Turn Positioning Lock for Ease of Installation
• IP-67 Rated Water Resistance
• 12VDC / 24VAC Dual Voltage Operation
VTC-IRM30-2812
Premium 2.1 Megapixel Indoor/
Outdoor 6-in-1 HD/EX-SDI / TVI / AHD
/ CVI / CVBS Motorized Varifocal Bullet
Camera with IR LED Illumination
Advertisement
Related Manuals for Vitek STARLIGHT VTC-IRM30-2812
Summary of Contents for Vitek STARLIGHT VTC-IRM30-2812
- Page 1 VTC-IRM30-2812 Premium 2.1 Megapixel Indoor/ Outdoor 6-in-1 HD/EX-SDI / TVI / AHD / CVI / CVBS Motorized Varifocal Bullet Camera with IR LED Illumination FEATURES: • 1/2.8” Sony® STARVIS 2.1 MegaPixel CMOS Sensor • 2.1 MegaPixel with Full 1080p/720p HD/EX-SDI 1.0, 2.0 / TVI / AHD / CVI / CVBS Output •...
-
Page 2: Safety Precaution
Safety Precaution To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage"... - Page 3 Safety Precaution NOTICE The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. Avoid installing in areas where shock or vibrations may occur. Pay attention to safety when running the connection cable and observe that the cable is not subjected to heavy loads, kinks or damage and no moisture can get in.
-
Page 4: Table Of Contents
Contents p.02~03 Safety Precaution p.04 Contents p.05 Composition p.05 Dimensions p.06~09 Installation Instructions p.10~26 Operating Instructions p.27 Specifications... -
Page 5: Composition
Composition Plastic Anchor: 6 x 30mm (3pcs) Mounting Screw: 4 x 40mm (3pcs) Camera Torque Wrench: 3mm (1pc) Video Sub-out: Cable (1pc) Operating Mounting Instruction Template Dimensions 3.17” 9.72” 9.29”... - Page 6 Part Names SUNSHIELD BOLT SUNSHIELD POWER CABLE OSD Setup CONTROL COVER DUAL WINDOW BRACKET REAR CASE FRONT CASE CAUTION • Extreme care should be taken NOT to scratch the window in front of lens. • Care should be taken that the cable is not damaged, kinked or exposed in hazardous areas.
-
Page 7: Installation Instructions
Installation Instructions 1. Locate the mounting template at the installation position and drill the ceiling or wall if needed. 2. Route the Power cable to the connecting place. 3. Place the camera bracket on pre-drilled position and attach it using mounting screws (4x40mm). - Page 8 Installation Instructions Pan & Tilt adjustments • Unlock the screw on the camera bracket through using the torque wrench supplied • Set the camera’s viewing angle then lock the screw on the bracket. 1) Pan limit: Pan is limited to +/- 90°. 2) Tilt limit: Tilt is limited to 0°(2°) min ~ 90°...
- Page 9 Installation Instructions Installation Instructions • Make sure power is removed before the installation. • Follow the order for applying power: Connect the power leads to the camera (observe polarity for DC power) then plug-in power. This will avoid damage to the camera from power surges and improper reseting .
-
Page 10: Operating Instructions
Operating Instructions Using OSD Controller Setup menu can be accessed and controlled by OSD control joystick on the side of the camera. Five commands are available with the joy stick. The design of OSD could be different according to the Model. Video Sub-out Connector SUB-OUT... - Page 11 Operating Instructions OSD menu Table MENU SUB MENU CONFIGURATION LENS MODE (INDOOOR, OUTDOOR, DEBLUR) MANUAL ZOOM / FOCUS AF MODE ZOOMPUSH, MANUAL MODE CHANGE ENABLED, DISABLED SCANNING HALF, FULL ONEPUSHAF SYNC TDN ON, OFF INITIAL 0~20 BRIGHTNESS EXPOSURE SHUTTER AUTO MANUAL 1/30(1/25), 1/60(1/50), 1/120(100), 1/250(200), (SPEED)
- Page 12 Operating Instructions ANALOG AHD MODE 0~10 IMAGE SHARPNESS MAIN OUT0 OUTPUT CVI MODE 0~10 ANALOG ANALOG CVBS OUT1 OUT1 SDI&CVBS 0~10 SDI OUT HD-SDI, EX-SDI 1.0, OUTPUT EX-SDI 2.0, OFF SDI&CVBS 0~10 GAMMA 0.45, 0.55, 0.65, 0.75 MIRROR OFF, ON FLIP OFF, ON D-WDR...
- Page 13 Operating Instructions OSD menu Startup Press the ‘OSD menu SET key’ down to access the setup menu mode. • EXIT : Enters ‘EXIT’ menu with save current setting or without save. • RETURN : Returns to the previous menu. MENU V0. XX 1.
- Page 14 Operating Instructions 2. ZOOM/FOCUS 2. ZOOM/FOCUS AF MODE AF MODE ZOOMPUSH MANUAL MODE CHANGE MODE CHANGE DISABLED NOT USED SCANNING SCANNING HALF HALF ONEPUSHAF ONEPUSHAF SYNC TDN SYNC TDN INITIAL INITIAL RETURN RETURN AF MODE Changes to MANUAL automatically after 3 hrs when MODE CHANGE is ENABLED. 2-2.
- Page 15 Operating Instructions 3. EXPOSURE 3. EXPOSURE BRIGHTNESS llllllllllllllllllllll SHUTTER AUTO SENS-UP llllllllllllllllllllll RETURN 3-1. BRIGHTNESS Adjusts the brightness of video (0~20). 3-2. SHUTTER Select AUTO or MANUAL. If shutter is set to Manual mode, SENS-UP mode is deactivated. 3-2-1. AUTO: Optimizes the video level by controlling the iris and the shutter speed automatically.
- Page 16 Operating Instructions 4. BACKLIGHT Compensates the video image by cutting out the bright areas with a mask or adjusting the contrast of the video. LEVEL llllllllllllllllllllll COLOR RETURN 4-1. HLC (High Light Compensation) Cuts out the bright area with a mask and excludes it from compensation. 4-1-1.
- Page 17 Operating Instructions WINDOW ZONE MODE WINDOW USE TARGET-BRT MIDDLE H-POS WEIGHT MIDDLE V-POS RETURN H-SIZE V-SIZE RETURN 4-3. WDR (Wide Dynamic Range) When part of an image is extremely dark but another part is so bright you can't see any details WDR will even the image out. 4-3-1.
- Page 18 Operating Instructions 5. DAY & NIGHT DAY/NIGHT is used to control the setting during day-time and night-time operation. Select the mode according to the light condition and the camera types. MENU V0. XX 1. LENS 5. DAY&NIGHT 2. ZOOM/FOCUS 3. EXPOSURE SMART IR 4.
- Page 19 Operating Instructions 5-2. AUTO Used when DAY or NIGHT is 5. DAY&NIGHT determined by light level through the lens and DAY from/to NIGHT SMART IR is switched automatically by the ANTI-SAT. llllllllllllllllllllll scene brightness. It can be AGC THRES llllllllllllllllllllll controlled by the AGC threshold AGC MARGIN llllllllllllllllllllll...
- Page 20 Operating Instructions 6. COLOR 6. COLOR AUTO COLOR GAIN llllllllllllllllllllll RETURN 6-1. AWB (Auto White Balance) Automatically tracks the changes of color temperature and continuously adjusts the white balance. AUTO, AUTOext, PRESET and MANUAL modes are available. 6-1-1. AUTO : Optimized for Indoor installation and compensates AWB for low color temperature such as incandescent lights.
- Page 21 Operating Instructions 7. 3D-NR (Digital Noise Reduction) DNR function improves picture quality by filtering out signal noise which is generated under low light conditions. Set off, low, middle or high level. 3DNR(3-dimensional noise reduction) which reduces noise by multi frames. It is effective in low light. Set to high will reduce the most noise but the image will be less sharp and a tailing effect might occur.
- Page 22 Operating Instructions 8-1. SHARPNESS Sets the Sharpness level 0~10. Increases or decreases the sharpness of the picture. Too much sharpness can make image harsh and show more noise as well as line flicker at the edge of object in the picture. 8-2.
- Page 23 Operating Instructions PRIVACY ZONE NUM ZONE DISP H-POS V-POS H-SIZE V-SIZE Y-LEVEL llllllllllllllllllllll CB LEVEL llllllllllllllllllllll CR LEVEL llllllllllllllllllllll TRANS RETURN 8-7-4. H-SIZE, V-SIZE : Adjusts the mask size using H, V direction. 8-7-5. Y LEVEL : Adjusts the mask color by Y LEVEL. (0: black ~ 20: white) 8-7-6.
- Page 24 Operating Instructions 9. MOTION DET WINDOW DET WINDOW WINDOW ZONE DET TONE WINDOW USE MDRECT FILL DET H-POS SENSITIVITY llllllllllllllllllllll DET V-POS MOTION OSD DET H-SIZE TEXT ALARM DET V-SIZE RETURN RETURN 9-2. DET ZONE Sets the detection zone 0 to 4 display types which window use setting ON. 0 : Set 100% opacity level of video background except detection window zone.
- Page 25 Operating Instructions A. SYSTEM Sets the system related functions. A. SYSTEM OUTPUT 1080 30P RESOLUTION US(NTSC) TV SYSTEM LANGUAGE CAM TITLE RESET RETURN HD-ANALOG OUTPUT MAIN OUTPUT ANALOG OUT0 ANALOG OUT0 TVI MODE HD-SDI SDI OUTPUT Y GAIN llllllllllllllllllllll TVI MODE ANALOG OUT0 CB GAIN llllllllllllllllllllll...
- Page 26 Operating Instructions If CVBS video is enabled through ANALOG OUT or Sub-out port, WDR and 3D-NR functions are disabled in all video outputs. It should be considered when installer adjusts the video with installation monitor via CVBS video signal. A-2. RESOLUTION Select the video resolutions, 1080P/720P are available.
-
Page 27: Specifications
12VDC / 24VAC (Dual Voltage) Weather Resistance IP67 Operating Temp. -4° ~ 122°F (-20° ~ +50°C) @ 20-80% RH Weight 31.75oz (900g) Dimension (WxHxD) 3.17” x 3.43” x 9.72” (80.5 x 87 x 247mm) (888) VITEK-70 | WWW.VITEKCCTV.COM 28492 Constellation Road Valencia, CA 91355... - Page 28 CONSIDER THESE OTHER GREAT PRODUCTS FROM OnCue Bridge 8 & 16 Channel Complete HD/EX-SDI, TVI, AHD, CVI, Analog & IP Recording Solution 8 & 16 Channel Stand-alone Real-time Video Recorders • Supports IP, HD/EX-SDI, TVI, AHD, CVI, Analog (CVBS) Cameras with automatic format detection •...
- Page 31 3 years. * Per a special agreement with Western Digital, as of August 2016, VITEK also warrants factory installed Hard Drives for the full 3 year span of the recorder warranty provided that the recorder was purchased through an authorized VITEK distributor.
- Page 32 Version 1.0 28492 CONSTELLATION ROAD VALENCIA, CA 91355 September 2017 WWW.VITEKCCTV.COM...
Need help?
Do you have a question about the STARLIGHT VTC-IRM30-2812 and is the answer not in the manual?
Questions and answers