User messages
Text message
j.
Ready
k.
Please wait
while heating up
l.
Fill hopper M1
(left)
Fill hopper M2
(right)
m.
Bean hopper missing
or command unit up
n.
Please
clean unit
© 2010 Thermoplan AG, Subject to change
Technical Manual
Reason / solution
• Coffee machine is ready
• Coffee boiler has not reached set temperature
–
Allow machine to heat about four minutes.
• High limit switches have tripped
–
Reset the high limit switches by firmly pushing them in. You must hear a click.
• Bad heating element
–
Check boiler heating
• Change hydraulic module
• Bean hopper out of beans or hopper gate closed
–
Behälter füllen oder verriegeln
• Bean hopper or grinder outlet is obstructed
–
Remove bean hopper and clear obstruction
• Defective 24V piston motor
• Defective grinder motor or capacitor
• Toothed belt or pulley is loose
–
check
• Change mechanic module
• Bean hopper or command unit not correctly mounted
–
Lift command unit up and check the lever of the bean hopper
–
Close command unit (snaps in audibly)
• Defective solenoid switch of command unit or bean hopper
–
Check solenoid switches
• No cleaning was performed since 24 hours
–
Perform daily cleaning
REV-0
SECTION 6
6.8