Specifications - Delta LYTE II DRL-480W Series Manual

Hide thumbs

Table of Contents

PRELIMINARY DATASHEET- For product review purpose only. The specs are subjected to change.

LYTE II DIN Rail Power Supply

DRL-480W series / DRL-V480W1EN

Specifications

Model Number

Input Ratings / Characteristics

Nominal Input Voltage

Input Voltage Range

Nominal Input Frequency

Input Frequency Range

Input Current

Efficiency at 100% Load

Average Efficiency

(25%, 50%, 75%, 100%)

No Load Power Consumption

Max Inrush Current (Cold Start)

Power Factor at 100% Load

Leakage Current

Output Ratings / Characteristics

Nominal Output Voltage

Factory Set Point Tolerance

Output Voltage Adjustment Range

Output Current

Output Power

Line Regulation

Load Regulation

PARD

(20 MHz)

Rise Time

Start-up Time

Hold-up Time

Dynamic Response

(Overshoot & Undershoot O/P Voltage)

Start-up with Capacitive Loads

*2 For power will be de-rating from 40°C to 70°C @ 115Vac & 50°C to 70°C @ 230 Vac, and Vin < 100 Vac, see Engineering Data power de-rating information.

*3 PARD is measured with an AC coupling mode, 5cm wires, and in parallel to end terminal with 0.1 μF ceramic capacitor & 47 μF electrolytic capacitor. PSU need to burn in

around 5 minutes when AMB ≤ 0°C

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (August 2021, Rev. X00)

DRL-24V480W1EN

100-240 Vac

90-264 Vac

50-60 Hz

47-63 Hz

4.6 A typ. @ 115 Vac, 2.3 A typ. @ 230 Vac

93.0% typ. @ 230 Vac

91.5% typ. @ 115 Vac

0.75 W max @ 115 Vac & 230 Vac