Mocka Denham Bedside Table Assembly Instructions Manual page 9

Denham Bedside Table
Assembly Instructions
14
V
Z
W
Attach 4x wedges (M) into the corners of the back of the unit and
secure with 4x screws (N). Tighten with a screwdriver. Attach 1x
safety straps (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
M
N
V
M
N
Z
W
M
N
N
M
N
M
15
X
V
Z
Y
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before use.
You're done, enjoy!
strap
wall
anchor
screw
9