Download Print this page
Hide thumbs Also See for Denham:

Advertisement

Quick Links

Denham Bookcase
Assembly Instructions
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
A
B
C
dowel
screw
bolt
x36
x18
x30
J
K
I
bolt
bracket
plastic
x8
x4
glide
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
D
F
locking
screw
Allen
x 6
Key
nut x30
x1
M
N
L
bolt
screw
adjuster
x16
x12
x1
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
H
handle
hinge
x3
x6
O
P
wedge
screw
x12
x36
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Denham and is the answer not in the manual?

Questions and answers

Summary of Contents for Mocka Denham

  • Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 2 Denham Bookcase Assembly Instructions Panel layout Insert 8x bolts (C) into panel [1] and 2x bolts (C) into panel [13]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 3 2x bolts (C) into Insert 8x bolts (C) into panel [12]. Turn it over insert 2x bolts (C) into panel [2].Tighten with a screwdriver. panel [12].Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 4 Attach panels [3], [6], [4] and [8] to panel [1] with 6x dowels (A) and secure the back of the unit as shown. with 8x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 5 Attach panel [2] to panels [3], [6], [4] and [8] with 6x dowels (A) secure with 8x locking nuts (D). Tighten with a screwdriver. with 2x locking nuts (D) and 6x screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 6 Attach panel [12] to panels [8], [4], [9] and [10] with 6x dowels (A) [10] to form the back of the unit as shown. and secure with 6x screws (B) and 2x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 7 Slide panel [5] down along the grooves between the panels [3] and secure with 8x locking nuts (D). Tighten with a screwdriver. [6] to form the back of the unit as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 8 Tighten with an Allen key (F). Turn 1x support leg [41] into panel [13] until firm. Insert the adjuster (M) into the middle support leg. Attach 4 x plastic glide (K) to legs [40] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 9 Tighten with a screwdriver. Tighten with a screwdriver. Ensure the doors open and close easily. Attach 3x handles (G) to panels [7] and [11] secure with 6x screws (E).Tighten with a screwdriver mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 10 (V) to the top of the back side of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. 1x wall screw (Y). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 11 MOVE DOOR BACK OR holes loosen 2 screws in oval holes. Screw in 2 screws in Loosen this screw a bit. Re-tighten this screw. FORTH holes a bit. round holes mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...