Table of Contents
Advertisement
The correct tension of the chain
The chain should not be too tight. It should
hang loose. Without effort you should be able
to move the chain up and down, half a
centimetre approximately.
To keep the tension of the chain correct, a
special tensioning wheel is fitted by the pedal
axis. If you have an electric motor, this tension
wheel is behind the battery, and you have to
remove the battery first.
To remove the battery [optional]:
1. Loosen the charge connector from the
battery. To loosen the connector: First pull
the knob [A] upwards and then turn the
connector a quarter round towards you [B].
Then pull the connector from the battery.
2. Undo the lock of the fastening device with
the key and open it.
3. Let the battery come ahead.
To adjust the tension wheel:
4. Slightly loosen the screw. Hold the nut at
the back tight with a socket wrench to stop
the screw from slipping.
5. Shift the tensioning wheel in such a way
that the chain hangs loose, as described
above.
6. Tighten the screw again.
User manual
Tavara Balance
[B]
[A]
2.
4.
5.
1.
3.
18
Advertisement
Table of Contents
