Dinstar DWG2000D User Manual
  1. Manuals
  2. Brands
  3. Dinstar Manuals
  4. Gateway
  5. DWG2000D
  6. User manual
Dinstar DWG2000D User Manual

Dinstar DWG2000D User Manual

Gsm voip gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DWG2000D GSM VoIP Gateway
User Manual V1.0
Shenzhen Dinstar Technologies Co., Ltd.
Address: Floor 6, Guoxing Building, Changxing Road, Nanshan District, Shenzhen, Guangdong
P.R.China. 518052
Tel: +86 755 2645 6664
Fax: +86 755 2645 6659
Email: sales@dinstar.com, support@dinstar.com
Website: www.dinstar.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DWG2000D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dinstar DWG2000D

Summary of Contents for Dinstar DWG2000D

  • Page 1 DWG2000D GSM VoIP Gateway User Manual V1.0 Shenzhen Dinstar Technologies Co., Ltd. Address: Floor 6, Guoxing Building, Changxing Road, Nanshan District, Shenzhen, Guangdong P.R.China. 518052 Tel: +86 755 2645 6664 Fax: +86 755 2645 6659 Email: sales@dinstar.com, support@dinstar.com Website: www.dinstar.com...
  • Page 2 DWG2000D-32G User Manual Revision Records Document version V1.0 Firmware version 2.22.02.01 Revised by Technical Support Team Date 23/05/2012 Changes The first version 1 / 57...

  • Page 3: Table Of Contents

    DWG2000D-32G User Manual Table of Contents 1. Equipment Introduction ......................4 1.1 Introduction ........................4 1.2 Applications Scenario ...................... 4 1.3 Product Appearance ......................5 1.4 Functions and Features ....................6 1.4.1 Protocol Standard Supported................6 1.4.2 System Function ....................6 1.4.3 Industrial Standards Supported ................
  • Page 4 DWG2000D-32G User Manual 4.6.8 BCCH ........................... 28 4.7 Routing Configuration ....................29 4.7.1 Routing Parameter ..................... 29 4.7.2 IP->Tel Routing ....................29 4.7.3 Tel->IP Routing ....................31 4.8 Manipulaton Configuration ................... 33 4.8.1 IP->Tel Destination Numbers ................33 4.8.2 Tel->IP Source Numbers ................... 35 4.8.3 Tel->IP Destination Numbers ................

  • Page 5: Equipment Introduction

    This chapter mainly introduces functions and structures of DWG2000D-32G. 1.1 Introduction DWG2000D-32G is full functions VoIP gateway based on IP and GSM network, which provides a flexible network configuration, powerful features, and good voice quality. It works for carrier grade, enterprise, residential users for cost-effective solution.

  • Page 6: Product Appearance

    DWG2000D-32G User Manual 1.3 Product Appearance The appearance of DWG2000D-32G shows as follow Figure 1-3-1 Front view of DWG2000D-32G Table 1-3-1 Description of Front view Index Sign Description ANT Interface Standard antenna interface indicator Indicator of SIM card, status: register, unregister...

  • Page 7: Functions And Features

    DWG2000D-32G User Manual 1.4 Functions and Features 1.4.1 Protocol Standard Supported  Standard SIP and MGCP(option) protocol;  Simple Traversal of UDP over NATs (STUN);  Point-to-point protocol over Ethernet (PPPoE);  Hypertext Transfer Protocol (HTTP);  Dynamic Host Configuration Protocol (DHCP);...

  • Page 8: General Hardware Specification

     Net weight: 6.4 kg 2. Equipment Quickly Installation This chapter mainly introduces DWG2000D-32G hardware installation and connection of equipment. 2.1 Installation Notice DWG2000D-32G provides standard RJ45 with 10Mbps or 100Mbps interfaces. For Wireless part, make sure antennas connecting well on device. Inserting SIM cards and GSM channels should work properly.

  • Page 9: Network Configuration

    DWG2000D-32G User Manual Figure 2-2-2 SIM card Installation (2) 3. Network Configuration In this chapter we will introduce the initial configuration of DWG2000D-32G. All of the network parameters of the gateway can be configured by IVR guidance. 3.1 Attentions In each step, if user hears an IVR message of “setting successful”, which means that user has finished this step successfully.

  • Page 10: Static Ip Configuration

    This is an optional configuration step. In case of user forgot the IP address or the device can’t obtain IP address from local network properly, IVR guideline may help to fix it. Assume that DWG2000D-32G IP address to be 172.16.80.89, subnet mask is 255.255.0.0, default gateway is 172.16.1.1, configure it through IVR as following steps: Please make sure SIM card installed well and registered Dial the phone number of the SIM card.

  • Page 11: Web Configuration

    Enter username and password and then click “OK” in configuration interface. The default username and password are “admin/admin”. We are strongly recommend to change the default password for security purpose. 4.2 WEB Configuration DWG2000D-32G WEB configuration interface consists of the navigation tree and the detail configuration interfaces. 10 / 57...

  • Page 12: System Information

    DWG2000D-32G User Manual Figure 4-2-1 WEB introduce 4.3 System Information System information interface shows the basic information of status information, Mobile information and SIP information. 11 / 57...

  • Page 13: System Information

    Table 4-3-1 Description of system information MAC Address Displays current MAC of device, for example: 00-00-00-00-00-00 Network Mode DWG2000D-32G works on bridge mode Network Shows IP address and subnet mask DNS Server Displays DNS server IP address in the same network with the gateway System Up Duration shows the time period of the device running.

  • Page 14: Mobile Information

    DWG2000D-32G User Manual 4.3.2 Mobile Information Figure 4-3-2 Mobile information Table 4-3-2 Description of mobile information Port GSM channel number, it is range from 0 to 31 Type Indicates the current type of network. Such as CDMA or GSM IMSI...

  • Page 15: Sip Information

    Displays registration status information with Softswitch platform or SIP Server Table 4-3-3 Description of SIP information Port The number of SIP channel, DWG2000D-32G has 32 ports SIP User ID SIP registration account which are provided by the Softswitch and SIP server Register Status Shows the registration status of VoIP channel, including registered and unregistered.

  • Page 16: Statistics

    DWG2000D-32G User Manual 4.4 Statistics 4.4.1 TCP/UDP Figure 4-4-1 TCP/UDP Statistics 4.4.2 RTP Figure 4-4-2 PRI Statistics Table 4-4-2 Description of RTP Statistics Port The port of RTP statistics Payload Type The voice code of this channel, Include G.723.1/PCMA/PCMU/G.729AB Packet Period...

  • Page 17: Ip To Gsm Call History

    DWG2000D-32G User Manual Table of 4.4.3 SIP Call History Port The port of Call statistics Incoming Received The amount of received incoming calls which coming from IP part Incoming connected The amount of incoming calls which have connected Incoming Answered...
  • Page 18 DWG2000D-32G User Manual Table of 4.4.4 IP to GSM Call History Port The port of Call statistics Call The number of IP->GSM call Duration Call duration Answered Response statistics Call Failed Canceled The number of cancellation caused by SIP Caused by...

  • Page 19: Network Configuration

    DWG2000D-32G User Manual 4.5Network Configuration 4.5.1 Local Network Figure 4-5-1 Local Network Table 4-5-1 Description of Local network Obtain IP Address Enable the device obtain IP Address automatically by DHCP or not. Automatically Default is enabling Use the Following IP Configure the "IP Address", "Subnet Mask"...

  • Page 20: Vlan Parameter

    DWG2000D-32G User Manual 4.5.2 VLAN Parameter Figure 4-5-2 VLAN Parameter Table 4-5-2 Description of VLAN Parameter Under standard VLAN protocol set VLAN ID. “0” is Data VLAN Data 802.1Q VLAN ID used to management VLAN, and can’t be used to service configure.

  • Page 21: Arp

    DWG2000D-32G User Manual 4.5.3 ARP The ARP function mainly used to query and add the map of IP and MAC. There are static or dynamic ARP entries. Like other routers, the gateway can automatically find the network device on the same segment. But, sometimes you don't want to use this automatic mapping;...

  • Page 22: Basic Configuration

    Acording to carrier’s band standards. Standards are as belows: Select Band GSM: 850/900/1800/1900 MHz; CDMA: 800 MHz API is mainly for third party software which developed based-on Dinstar API Remote API Enable protocol. Its help to provide bulk SMS/ SMS/USSD over IP service.

  • Page 23: Mobile Configuration

    DWG2000D-32G User Manual 4.6.2Mobile Configuration Figure 4-6-2 Mobile State 22 / 57...
  • Page 24 DWG2000D-32G User Manual Figure 4-6-3 Mobile Configuration Table 4-6-2 Description of Mobile Configuration Mobile Number Phone number of current SIM card Enable Call Duration Definite maximum call duration for single call. Example: if Time of single Limitation of single call...

  • Page 25: Pin Management

    DWG2000D-32G User Manual number via SMS. Mobile Number (Receiving Receiving alarm phone number, user will received alarm message from Alarm) gateway. Port Description for Alarm Alarm port information description, which will be sent to user mobile phone with alarm information.

  • Page 26: Smsc

    DWG2000D-32G User Manual 4.6.4 SMSC Figure 4-6-5 SMSC SMS center of mobile, in most places, the celluar modular will automatically detect the SMSC number. This configurable option is used in a situation that the SMSC number could not detected by celluar modular.

  • Page 27: Ussd

    DWG2000D-32G User Manual 4.6.6 USSD USSD (Unstructured Supplementary Service Data) is a Global System for Mobile(GSM) communication technology that is used to send text between a mobile phone and an application program in the network. Applications may include prepaid roaming or mobile chatting. USSD can cluster and group of charge...

  • Page 28: Carrier

    DWG2000D-32G User Manual Table 4-6-6 Description of USSD Port Select the GSM channel to send USSD USSD Reply Display the state of USSD USSD Request Display the result of sending USSD 4.6.7 Carrier Figure 4-6-8 Select Carrier This function is used to select carrier.

  • Page 29: Bcch

    DWG2000D-32G User Manual 4.6.8 BCCH Figure 4-6-9 BCCH Figure 4-6-10 BCCH 28 / 57...

  • Page 30: Routing Configuration

    DWG2000D-32G User Manual Table 4-6-7 Description of BCCH Refresh Interval Set frequency detection refresh time Auto Refresh/Stop Refresh Choose whether to refresh frequency Index Serial number Mobile country code, China is 460 Mobile network code, used to distinguish between different network...
  • Page 31 DWG2000D-32G User Manual Figure 4-7-3 IP to Tel Routing Add Table 4-7-2 Description of IP to Tel Routing This item uses to configure outgoing call routes which can be used for recieve the calls IP ->Tel Routing from the GSM It uniquely identifies a route.

  • Page 32: Tel->Ip Routing

    DWG2000D-32G User Manual 4.7.3 Tel->IP Routing Figure 4-7-3 Tel to IP Routing Table 4-7-3 Description of Tel to IP Routing This item uses to configure incoming call routes which can be used for Tel -> IP Routing recieve the calls from the GSM.
  • Page 33 DWG2000D-32G User Manual Figure 4-7-4 Tel to IP routing Modify It's a default route configured in gateway. It allows any number from source port 0 send call to SIP server with any prefix. Figure 4-7-5 Tel to IP routing Modify Add a GSM to VoIP route.

  • Page 34: Manipulaton Configuration

    DWG2000D-32G User Manual Figure 4-7-6 Tel to IP routing Modify Add GSM to GSM route,its mainly used for saving the cost between two carriers.It indecates that calls coming from Port 0 will match the prefix 13[58], ”13[58]” include prefix 135 and 138, caller number can’t match prefix 135 and 138 will reject by gateway.
  • Page 35 DWG2000D-32G User Manual  Any: any IP address  IP: specific an IP address  IP Group: specific an IP group All the caller number must match the source prefix. It specifies the source prefix allow to send call out ...

  • Page 36: Tel->Ip Source Numbers

    DWG2000D-32G User Manual 4.8.2 Tel->IP Source Numbers Figure 4-8-3 Tel->IP destination numbers manipulation Table 4-8-2 Description of Tel->IP destination numbers manipulation It is an optional configuration item, and is used to add IP->Tel number Tel->IP destination change data. numbers manipulation The IP->Tel Manipulation defined the rules of add, and deletion of called...

  • Page 37: Tel->Ip Destination Numbers

    DWG2000D-32G User Manual Figure 4-8-4 Tel ->IP destination numbers manipulation add It indicates that calls coming from IP Group will match the prefix ”any”, and the called nubmer which match with the prefix ”2547” will delete 3 digits in front of it and replace it by digit ”0”.

  • Page 38: Operation

    DWG2000D-32G User Manual  Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.  0xxxx: consist of some digits such as 015,08,09 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186 Destination Its specifies destination Port or Port Group Stripped Digits from It specifies the length of the digits to be deleted from left...

  • Page 39: Ip->Tel Operation

    DWG2000D-32G User Manual 4.9.1 IP->Tel Operation Figure 4-9-1 IP->Tel Operation Table 4-9-1 Description of IP->Tel Operation It is an optional configuration item. Operation configuration essentially IP->Tel Operation involves allow, barring some IP and IP Group send calls to certain numbers. It includes: forbid call, call allowance, auto call, and password authentication.

  • Page 40: Tel->Ip Operation

    DWG2000D-32G User Manual Figure 4-9-2 IP->Tel Operation Modify It indicates that calling party from IP 14<elastix> matched prefix 2877, and also called party matched prefix 07 are not allowed call out. The calls match this rule will be rejected by gateway.

  • Page 41: Port Group Configuration

    DWG2000D-32G User Manual Table 4-9-2 Description of Tel->IP Operation It is an optional configuration item. Operation configuration essentially Tel->IP Operation involves allow, barring some IP and IP Group send calls to certain numbers. It includes: forbid call, call allowance, auto call, and password authentication.
  • Page 42 DWG2000D-32G User Manual Figure 4-10-2 Port Group Modify Table 4-10-1 Description port group Index Port group priority Description Port group decription Select Mode Choose the port that composition port group by drop-down list select mode Port The selected port If you have the need for a group of port the same operation, then port group of configuration can help you improve efficiency.

  • Page 43: Ip Trunk Configuration

    DWG2000D-32G User Manual 4.11 IP Trunk Configuration 4.11.1 IP Trunk Figure 4-11-1 IP Trunk Table 4-11-1 Description of IP Trunk Add remote IP of Softswitch, SIP server which will send call traffics to IP Trunk gateway. Index It uniquely identifies a trunk, ranging from 0 to 31.

  • Page 44: Ip Trunk Group

    DWG2000D-32G User Manual 4.11.2 IP Trunk Group Figure 4-11-3 IP Trunk Group Table 4-11-2 Description of IP Trunk Group This configuration is optional, and is used to add the IP that have the same IP Trunk Group attributes to an IP group. The IP group will referenced by IP->Tel routing and number manipulation.

  • Page 45: System Configuration

    LOCAL Start RTP PORT Means the initial port when RTP voice stream transmit in the IP network , in general, using the factory default values. When there are multiple DINSTAR series voice products, and the network gateway or router’s NAT with...
  • Page 46 PSTN Incoming Calls the device will play dial tone DTMF DWG2001/DWG2004/DWG2000D-32G support RFC2833 and SIGNAL two ways. DTMF INTERVAL range is 50 ~ 800ms, DTMF VOLUME can use the default Configuration Include Static NAT and STUN, NAT’s UDP simple cross...

  • Page 47: Sip Configuration

    DWG2000D-32G User Manual 4.12.2 SIP Configuration Figure 4-12-2 SIP Configuration Table 4-12-2 SIP Configuration SIP Server Used for configure SIP server address and port, the address can be IP Address, Address also can be a domain nameWhich can be resolved by DNS server SIP Proxy Port Port default setting is 5060.
  • Page 48 DWG2000D-32G User Manual Used to define the SIP protocol T1 timer value, default is 500ms Used to defines the SIP protocol timer values, default value is 4000ms Used to define the T2 timer value in SIP protocol, the default is 5000ms...

  • Page 49: Port Parameter

    DWG2000D-32G User Manual 4.12.3 Port Parameter Figure 4-12-3 Port Parameter Table 4-12-3 Description of Port Configuration Port Configuration Used to configure ports’ gain, Auto-Dial, etc. ALL ports register used The default is not. If set to "yes" ,all the port will use user ID...

  • Page 50: Digit Map

    DWG2000D-32G User Manual 4.13 Digit Map Figure 4-13-1 Digit map Digit Map Syntax: 1. Supported objects Digit: A digit from "0" to "9". Timer: The symbol "T" matching a timer expiry. DTMF: A digit, a timer, or one of the symbols "A", "B", "C", "D", "#", or "*".

  • Page 51: Tools

    DWG2000D-32G User Manual string becomes "411". We have a partial match with "xxxxxxx", but a complete match with "x11", and hence we send "411" to the Call Agent. 2. [2-8] xxxxxx | 13xxxxxxxxx Means that first is "2","3","4","5","6","7" or "8", followed by 6 digits;...

  • Page 52: Config Backup

    DWG2000D-32G User Manual Table 4-14-1 Management Parameter Voice Prompt Language Select the language of voice prompt. There are two kind of voice : English and Chinese Syslog Paremeter Syslog is a standard for network device data logging. It allows separation of the software that generates messages from the system that stores them and the software that reports and analyzes them.

  • Page 53: Ping Test

    DWG2000D-32G User Manual Figure 4-14-5 IVR Voice Prompt Upload NOTE: the customize voice files can be recorded using Windows recording programs, the sound format is 8000Hz, 16 bit sampling in mono, with WAV format, size of files can not exceed 190KB.

  • Page 54: Login Password

    DWG2000D-32G User Manual Figure 4-14-7 Tracert Test 4.14.8 Login Password Figure 4-14-8 IVR Voice Prompt Upload When using web or telnet Configuration, please enter default user name and password. User can modify the login name and password. 53 / 57...

  • Page 55: Factory Reset

    DWG2000D-32G User Manual 4.14.9 Factory Reset Figure 4-14-9 Factory Reset Be careful do this operation, after restore factory setting, all the parameters will be changed to the factory default. 4.14.10 Restart Figure 4-14-10 Restart 5. FAQ 5.1 Device has been connected to network physically, but cannot access the gateway 1) Make sure the network cable is ok , can through view the device network port indicator light to determine the physical connection is working or not;...
  • Page 56 4) Make sure the LAN equipment is working, user can try to restart the gateway or router to solve the problem 5) Check whether there is more than one DINSTAR series products in LAN network: some gateways or routers, processing network packet is vulnerable (for example, to multiple network devices or the same protocol network communication, NAT allocated the same conversion communications Channel).

  • Page 57: Glossary

    DWG2000D-32G User Manual 6. Glossary GSM: Global System for Mobile Communications CDMA: Code Division Multiple Access FMC: Fixed Mobile Convergence SIP: Session Initiation Protocol MGCP: Media Gateway Control Protocol DTMF: Dual Tone Multi Frequency USSD: Unstructured Supplementary Service Data PSTN：Public Switched Telephone Network...

Table of Contents