Dinstar DWG2000B-16G User Manual
  1. Manuals
  2. Brands
  3. Dinstar Manuals
  4. Gateway
  5. DWG2000B-16G
  6. User manual
Dinstar DWG2000B-16G User Manual

Dinstar DWG2000B-16G User Manual

Hide thumbs Also See for DWG2000B-16G:
Table of Contents

Advertisement

Quick Links

Download this manual
DWG2000B-16G User Manual V2.0
Dinstar Technologies Co., Ltd.
Address: Floor 6, Guoxing Building, Changxing Road, Nanshan District, Shenzhen,
China
Postal Code: 518052
Telephone: +86 755 2645 6664
Fax: +86 755 2645 6659
Emails: sales@dinstar.com, support@dinstar.com
Website: www.dinstar.com www.dinstar.cn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DWG2000B-16G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dinstar DWG2000B-16G

Summary of Contents for Dinstar DWG2000B-16G

  • Page 1 DWG2000B-16G User Manual V2.0 Dinstar Technologies Co., Ltd. Address: Floor 6, Guoxing Building, Changxing Road, Nanshan District, Shenzhen, China Postal Code: 518052 Telephone: +86 755 2645 6664 Fax: +86 755 2645 6659 Emails: sales@dinstar.com, support@dinstar.com Website: www.dinstar.com www.dinstar.cn...
  • Page 2 DWG2000B-16G User Manual Revision Records Document version Firmware version 2.22.01.03 Revised by Technical Support Department Date 11/06/2012 Changes The first version _______________________________________________________________________________ Dinstar Technologies Co., Ltd.

  • Page 3: Table Of Contents

    DWG2000B-16G User Manual Table of Contents 1. Equipment Introduction ....................4 1.1 Introduction ......................4 1.2 Scenario of Applications of Products..............4 1.3 Product Appearance ....................5 1.4 Functions and Features..................6 1.4.1 Protocol Standard Supported ............... 6 1.4.2 System Function ..................6 1.4.3 Industrial Standards Supported..............
  • Page 4 DWG2000B-16G User Manual Figure 4-6-2 Mobile State ..................24 4.6.4 PIN Management ..................26 4.6.5 SMSC ......................26 4.6.6 SMS ......................27 4.6.7 USSD ......................28 4.6.8 Carrier ......................29 4.6.9 BCCH ......................29 4.7 Routing Configuration ................... 30 4.7.1 Routing Parameter ..................30 4.7.2 IP->Tel Routing...................

  • Page 5: Equipment Introduction

    This chapter mainly introduces functions and structures of DWG2000B-16G. 1.1 Introduction DWG2000B-16G is full functions VoIP gateway based on IP and GSM network, which provides a flexible network configuration, powerful features, and good voice quality. It works for carrier grade, enterprise, SOHO, residential users for cost-effective solution.

  • Page 6: Product Appearance

    DWG2000B-16G User Manual 1.3 Product Appearance The appearance of DWG2000B-16G shows as follow Figure 1-3-1 Front view of DWG2000B-16G Table 1-3-1 Description of Front view Sign Description Ethernet Interface,10/100M Base-TX, RJ-45 Serial port is a serial communication physical interface through which...

  • Page 7: Functions And Features

    DWG2000B-16G User Manual Table 1-3-2 Description of Rear view Sign Description Power Switch Power Switch of the device Power 110~240VAC,50~60Hz, 1.2A Input 1.4 Functions and Features 1.4.1 Protocol Standard Supported  Standard SIP and MGCP(option) protocol;  Simple Traversal of UDP over NATs (STUN);...

  • Page 8: Industrial Standards Supported

    DWG2000B-16G User Manual  White and black list  One number access  Open API for SMS, support USSD  Echo Cancellation (with ITU-T G.168/165 standard)  Automatic negotiate network  Hotline  BCCH 1.4.3 Industrial Standards Supported  Stationary use environment: EN 300 019: Class 3.1 ...

  • Page 9: Equipment Quickly Installation

    2.1 Installation Notice DWG2000B-16G uses AC power. Power supply should ensure the reliability and stability, otherwise, it may damage the SIM card or device. In addition, make sure the power supply connects to ground bar well. With right ground protect connection, that can reduce the...
  • Page 10 DWG2000B-16G User Manual  Inset the SIM card to the SIM slot  Push in the GSM user board Figure 2-2-1 Pull out the GSM user board Figure 2-2-2 I Inset the SIM card to the SIM Figure 2-2-3 Push in the GSM user board _______________________________________________________________________________ Dinstar Technologies Co., Ltd.

  • Page 11: Antenna Installation

    DWG2000B-16G User Manual 2.2.2 Antenna Installation Figure 2-2-4 Antenna Installation 2.2.3 Network Cable Connection of Equipment Figure 2-2-5 DWG2000B-16G connection 2.2.4 Power Cable Connection of Equipment Figure 2-2-6 DWG2000B-16G connection _______________________________________________________________________________ Dinstar Technologies Co., Ltd.

  • Page 12: Network Configuration

    DWG2000B-16G User Manual 3. Network Configuration In this chapter we will introduce the initial configuration of DWG2000B-16G. All of the network parameters of the gateway can be configured by IVR guidance. 3.1 Attentions In each step, if user hears an IVR message of “setting successful”, which means that user has finished this step successfully.

  • Page 13: Web Configuration

    4. WEB configuration This charpter describes web configuration of DWG2000B-16G. 4.1 Access the System through HTTP Enter IP address of DWG2000B-16G in browser. The default IP of LAN port is 192.168.11.1. and the GUI shows as below: Figure 4-1-1 WEB log interface Enter username and password and then click “OK”...

  • Page 14: Web Configuration

    DWG2000B-16G User Manual 4.2 WEB Configuration DWG2000B-16G WEB configuration interface consists of the navigation tree and the detail configuration interfaces. Figure 4-2-1 WEB introduce Go through navigation tree, user can check, view modify, and set the device configuration on the right of configuration interface.

  • Page 15: Mobile Information

    MAC Address Displays the current MAC of the gateway, for example: 00-1F-D6-1B-3D-02 Network Mode DWG2000B-16G works on bridge mode Network Shows IP address and subnet mask DNS Server Displays DNS server IP address in the same network with the gateway System Up Shows the time period of the device running.
  • Page 16 DWG2000B-16G User Manual Table 4-3-2 Description of mobile information Port Number of GSM/CDMA ports . Type Indicates the current type of network. Such as CDMA or GSM IMSI International Mobile Subscriber Identity, it is the uniquely identifies of SIM card...

  • Page 17: Sip Information

    Displays registration status information with Softswitch platform or SIP Server Table 4-3-3 Description of SIP information Port The number of GSM channel, DWG2000B-16G has 16 ports SIP User ID SIP registration account which are provided by the Softswitch and SIP...

  • Page 18: Statistics

    DWG2000B-16G User Manual 4.4 Statistics 4.4.1 TCP/UDP Figure 4-4-1 TCP/UDP Statistics 4.4.2 RTP Figure 4-4-2 RTP Table 4-4-1 Description of RTP Statistics Port The port of RTP statistics Payload Type voice code this channel, Include G.723.1/PCMA/PCMU/G.729AB Packet Period Time of packaging...

  • Page 19: Sip Call History

    DWG2000B-16G User Manual 4.4.3 SIP Call History Figure 4-4-3 SIP Call History Table 4-4-2 SIP Call History Port The port of Call statistics Incoming The amount of received incoming calls which coming from IP part Received Incoming The amount of incoming calls which have connected...

  • Page 20: Network Configuration

    DWG2000B-16G User Manual Port Device GSM port Call Statistics the number of calls in this port Duration Statistics call total time Answered Statistics response times Call Failed Caused by SIP Statistics cause of call failure from SIP, include:canceled/ timeout/ not allowed/ Negotiation failed...
  • Page 21 DWG2000B-16G User Manual Table 4-5-1 Description of Local network Obtain IP Address Enable the device obtain IP Address automatically or not. Automatically Default is enabling Use the Following IP Configure the "IP Address", "Subnet Mask" and "Default Address Gateway" by manual Need ISP offer the account and password.

  • Page 22: Vlan Parameter

    DWG2000B-16G User Manual 4.5.2 VLAN Parameter Figure 4-5-2 VLAN Parameter _______________________________________________________________________________ Dinstar Technologies Co., Ltd.

  • Page 23: Arp

    DWG2000B-16G User Manual Table 4-5-2 Description of VLAN Parameter Data VLAN Data 802.1Q VLAN ID Under standard VLAN protocol set VLAN ID. “0” is used to management VLAN, and can’t be used to service configure. Data 802.1p Priority (0-7) Under 802.1q protocol users can set...

  • Page 24: Mobile Configuration

    DWG2000B-16G User Manual 4.6 Mobile Configuration 4.6.1 Basic Configuration Figure 4-6-1Basic Configuration Table 4-6-1 Description of Basic Configuration Dial Tone Gain It is the dial tone volume of call waiting, dial tone of mobile module when call out. Usually adopt the default configuration.

  • Page 25: Mobile Configuration

    DWG2000B-16G User Manual 4.6.2 Mobile Configuration Figure 4-6-2 Mobile State Figure 4-6-3 Mobile Configuration _______________________________________________________________________________ Dinstar Technologies Co., Ltd.
  • Page 26 DWG2000B-16G User Manual Table 4-6-2 Description of Mobile Configuration Mobile Number SIM card number of the channel. That must be configured when “Forward” funciton enable. Step ep length value range is 1-120 s, step length multiplied by time of single call just said a single call duration time allowed.

  • Page 27: Pin Management

    Detect Reverse This option for CMDA Reverse Polarity detection. Most CDMA Polarity operators don't offer polarity reverse . So VoIP to mobile, DWG2000B-16G will connect soon. It doesn't wait mobile side answer. 4.6.4 PIN Management Figure 4-6-4 PIN Management Detailed description as below: Table 4-6-3 Description of PIN Management Personal identification number of SIM card.

  • Page 28: Sms

    DWG2000B-16G User Manual Figure 4-6-5 SMSC SMS center of mobile, in most places, the celluar modular will automatically detect the SMSC number. This configurable option is used in a situation that the SMSC number could not detected by celluar modular. When such case happens, please contact with mobile service provider to identify the SMSC number and then add SMSC number in SMSC configurable web interface.

  • Page 29: Ussd

    DWG2000B-16G User Manual 4.6.7 USSD USSD (Unstructured Supplementary Service Data) is a Global System for Mobile(GSM) communication technology that is used to send text between a mobile phone and an application program in the network. Applications may include prepaid roaming or mobile chatting.

  • Page 30: Carrier

    DWG2000B-16G User Manual 4.6.8 Carrier Figure 4-6-8 Select Carrier This function is used to select carrier. Table 4-6-6 Description of select Carrier Select Port Select GSM channel, default Port 0 Select Mode There are two modes to select carrier automatic and manual.

  • Page 31: Routing Configuration

    DWG2000B-16G User Manual Choose a frequency to lock the operations. 4.7 Routing Configuration 4.7.1 Routing Parameter Figure 4-7-1 Routing Parameter Table 4-7-1Description of Routing Parameter Tel->IP Globle parameters, it will take effect while number manipulation Parameter configured Route calls after The parameters indicate that the gateway will select Tel->IP routes...

  • Page 32: Tel->Ip Routing

    DWG2000B-16G User Manual The route preferentially match the rules which the value of index is smaller It describes the route for the ease of identification. Its value is character Description string Source IP It specifies the IP of the caller All the caller number must match the source prefix.
  • Page 33 DWG2000B-16G User Manual source prefix allow to send call out  Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.  0xxxx: consist of some digits such as 015,08,09  1[3-8]6:consist of some prefix, include 136,146,156,166,176, All the called number must match the destination prefix, the call prefix indicates the connected number ...

  • Page 34: Manipulaton Configuration

    DWG2000B-16G User Manual Add a GSM to VoIP route. It indicates that the calls coming from Port Group 31<Unicom> will match the prefix ”x.”, ”x.” is a wildcard string which will match any prefix except ”anonymous” calls. Meanwhile sending the calls destination IP 13<eia> if called number match with destination prefix ”00”.
  • Page 35 DWG2000B-16G User Manual Table 4-8-1 Description of IP->Tel destination numbers manipulation IP->Tel destination It is an optional configuration item, and is used to add a rule for numbers changing number manipulation It uniquely identifies a route. Its value is assigned globally, Index ranging from 0 to 31.The route preferentially match the rules...

  • Page 36: Tel->Ip Source Numbers

    DWG2000B-16G User Manual It indicates that calls coming from IP Group will match the prefix ”any”, and the called nubmer which match with the prefix ”2547” will delete 3 digits in front of it and replace it by digit ”0”.
  • Page 37 DWG2000B-16G User Manual All the caller number must match the source prefix. It specifies the source prefix allow to send call out  Any: include anonymous, 0xxxx, 1[2-9]xxxx etc. Source Prefix  0xxxx: consist of some digits such as 015,08,09 ...

  • Page 38: Tel->Ip Destination Numbers

    DWG2000B-16G User Manual 4.8.3 Tel->IP Destination Numbers Figure 4-8-5 Tel->IP destination numbers manipulation Table 4-8-3 Description of Tel->IP destination numbers manipulation It is an optional configuration item, and is used to add IP->Tel Tel->IP destination number change data. numbers The IP->Tel Manipulation defined the rules of add, and deletion of manipulation called numbers, which are referenced by IP->Tel routing.

  • Page 39: Operation

    DWG2000B-16G User Manual Example Add an IP->Tel Manipulation, to change the called number from 2547888888 to 07888888 Figure 4-8-6 Tel->IP destination numbers manipulation It indicates that calls coming from IP Group will match the prefix ”any”, and the called nubmer which match with the prefix ”2547” will delete 3 digits in front of it and replace it by digit ”0”.
  • Page 40 DWG2000B-16G User Manual auto call, and password authentication. It uniquely identifies a route. Its value is assigned globally, ranging Index from 0 to 31. It specifies the source IP which will send the calls to gateway  Any: any IP address Source IP ...

  • Page 41: Tel->Ip Operation

    DWG2000B-16G User Manual It indicates that calling party from IP 14<elastix> matched prefix 2877, and also called party matched prefix 07 are not allowed call out. The calls match this rule will be rejected by gateway. Index 29: definite a rule for IP 17<FreeSentral> that all the calls must go with valid password authentication.

  • Page 42: Port Group Configuration

    DWG2000B-16G User Manual  0xxxx: consist of some digits such as 015,08,09  1[3-8]6:consist of some prefix, include 136,146,156,166,176, All the called number must match the destination prefix, the call prefix indicates the connected number  Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.

  • Page 43: Ip Trunk Configuration

    DWG2000B-16G User Manual 4.11 IP Trunk Configuration 4.11.1 IP Trunk Figure 4-11-1 IP Trunk Table 4-11-1 Description of IP Trunk Add remote IP of softswitch, SIP server which will send call traffics IP Trunk to gateway. It uniquely identifies a trunk . Its value is assigned globally, ranging Index from 0 to 31.

  • Page 44: Ip Trunk Group

    DWG2000B-16G User Manual 4.11.2 IP Trunk Group Figure 4-11-3 IP Trunk Group Table 4-11-2 Description of IP Trunk Group This configuration is optional, and is used to add the IP that have IP Trunk Group the same attributes to an IP group. The IP group will referenced by IP->Tel routing and number manipulation.

  • Page 45: System Configuration

    Means the initial port when RTP voice stream transmit in the IP LOCAL RTP PORT network , in general, using the factory default values. When there Channel are multiple DINSTAR series voice products, and the network _______________________________________________________________________________ Dinstar Technologies Co., Ltd.
  • Page 46 DWG2000B-16G User Manual gateway or router’s NAT with loopholes, user can try changing this item Enable Silence Enable the "silence suppression" almost no impact on call quality, Suppression and can save about half of the bandwidth. Each country has its different call progress tone required standards,...

  • Page 47: Sip Configuration

    DWG2000B-16G User Manual terminal Channel. This information is used for two host to set up UDP communication behind the same NAT router. The agreement defined by the RFC 3489 Refer to "SIP Configuration" -> "Is register" . If "Is register" setting is...
  • Page 48 DWG2000B-16G User Manual Table 4-12-2 SIP Configuration Used for configure SIP server address and port, the address can be IP SIP Server Address, also can be a domain nameWhich can be resolved by DNS Address server Port default setting is 5060. For details, please consult the service...
  • Page 49 DWG2000B-16G User Manual Register Means how often the equipment will register to the SIP server/proxy Interval The DNS query type defines the type of information that will be DNS query type requested from DNS server DNS refresh The interval of DNS refresh, Range from 0 to 60000 mins, 0 means interval disable default value is disable.

  • Page 50: Port Configuration

    DWG2000B-16G User Manual Used to config the compatibility of SIP Response Code , Fill the Response response code in the front , and Fill the switch code in the behind Code switch 4.12.3 Port Configuration Figure 4-12-3 Port List Figure 4-12-4 Port Configuration...

  • Page 51: Digit Map

    DWG2000B-16G User Manual used same user ID It is the account used for registration, equipment port's unique SIP User ID identifier Used for authenticate Authenticate ID Password Its register Password Its DSP’s Tx Gain. Adjusting it will effect volume on GSM side.
  • Page 52 DWG2000B-16G User Manual DTMF: A digit, a timer, or one of the symbols "A", "B", "C", "D", "#", or "*". 2. Range [] One or more DTMF symbols enclosed between square brackets ("[" and "]"), but only one can be selected.

  • Page 53: Tools

    DWG2000B-16G User Manual 4.14 Tools 4.14.1 Firmware Upload Figure 4-14-1 Firmware upload Select the software, Web and Dsp firmware program under correct directory services, and then click upload will complete upgrade the firmware. During the upgrade process, please do not swtich off the power supply, equipment may paralyze.

  • Page 54: Config Backup

    DWG2000B-16G User Manual Table 4-14-1 Management Parameter Voice Prompt Select the language of voice prompt. There are two kind of Language voice : English and Chinese SysLog Paremeter Syslog is a standard for network device data logging. It allows separation of the software that generates messages from the system that stores them and the software that reports and analyzes them.

  • Page 55: Config Restore

    DWG2000B-16G User Manual 4.14.4 Config Restore Figure 4-14-4 Data restore Send data file from your computer to the device 4.14.5 IVR Voice Prompt Upload By default, when PSTN call incoming, the system will play the default IVR, and also the user can load custom IVR.

  • Page 56: Tracert Test

    DWG2000B-16G User Manual 4.14.7 Tracert Test Tracert is a computer network diagnostic tool for displaying the route (path) and measuring transit delays of packets across an Internet Protocol (IP) network. Figure 4-14-7 Tracert Test 4.14.8 Username & Password Figure 4-14-8 IVR Voice Prompt Upload _______________________________________________________________________________ Dinstar Technologies Co., Ltd.

  • Page 57: Factory Reset

    DWG2000B-16G User Manual When using web or telnet Configuration, please enter default user name and password. User can modify the login name and password. 4.14.9 Factory Reset Figure 4-14-9 Factory Reset Be careful do this operation, after restore factory setting, all the parameters will be changed to the factory default.

  • Page 58: Faq

    DWG2000B-16G User Manual 5. FAQ 5.1 Device have been connected to network physically, but can not access the gateway 1) Make sure the network cable is ok , can through view the device network port indicator light to determine the physical connection is working or not;...
  • Page 59 DWG2000B-16G User Manual to solve the problem 5) Check whether there is more than one DINSTAR series products in LAN network: some gateways or routers, processing network packet is vulnerable (for example, to multiple network devices or the same protocol network communication, NAT allocated the same conversion communications Channel).

  • Page 60: Glossary

    DWG2000B-16G User Manual 6. Glossary GSM: Global System for Mobile Communications CDMA: Code Division Multiple Access FMC: Fixed Mobile Convergence SIP: Session Initiation Protocol MGCP: Media Gateway Control Protocol DTMF: Dual Tone Multi Frequency USSD: Unstructured Supplementary Service Data PSTN：Public Switched Telephone Network...

Table of Contents