Table of Contents
Advertisement
2
SAFETY
2.1
Basic safety instructions
Most accidents when handling technical equipment occur due to disregarding the basic safety
regulation.
Noticing a potential danger can prevent accidents from happening. If dangers are present, then
safety information on the machine and in this document will provide a warning. If warnings are
not adhered to then it may lead to personal injury or death.
FIBRO GMBH can not foresee all potential situations which may potentially causes. The warn-
ings in this document and on the machine are therefore not all encompassing.
Staff has to have the required training and experience as well as the necessary tools in order to
carry out work on the machine correctly.
Improper operation, warning or repair can be dangerous and cause severe injury or death.
No work for transport, assembly, maintenance or repair must be carried out if the information
about transport, assembly, maintenance or repair has not been read and understood.
The machine may not be used in any different way as described in these instructions. All safety
regulations and protection measures at the installation location applicable to the use have to be
adhered to including location specific regulation and workplace safety measures.
If a work material, an act, a work method or work technique is used which has not been specif-
ically suggested by FIBRO GMBH, then the user has to ensure the safety for himself and other
persons.
He also has to ensure that the machine is not damaged or rendered unsafe by carrying out the
work for operation, maintenance and repair.
The information, descriptions and illustrations in this documents are based on the information
on the basis of information which was available at the point of creation of this document.
These and other points can change at any point. The changes can have an influence on the ma-
chine properties. Prior to starting any work, obtain the currently available information.
12/38
Instructions manual Nitrogen Compact Booster
Safety
Advertisement
Table of Contents
