Set-Up - FIBRO 2480.00.32.71 Instruction Manual

Introduction
1.6

Set-up

The illustration shows a schematic diagram of the principal set-up of the machine
The machine consists of:
To fill a gas spring a filling hose, a filling adapter and a filling and control fitting is required.
The parts can be ordered from FIBRO GMBH using the indicated order number.
Instructions manual Nitrogen Compact Booster
1 Compressor
2 Start-up valve
3 Filter- and control valve compressed air
4 Nitrogen outlet (labelled with B)
5 Pressure relief valve
6 Nitrogen inlet via bottle hose (labelled with A)
1
a Filling and control fitting
Filling adapter M6
b
Filling adapter G1/8"
c Filling hose
2
Fig. 1-1 Set-up
Order number
Order number
Order number
Order number
3
4
5
6
2480.00.32.21
2480.00.32.10
2480.00.32.11
2480.00.31.02
7/38