Table of Contents
Advertisement
Introduction
1.7
Function
The filling of a gas spring directly from a nitrogen bottle only works if the pressure in the bottle
is higher than the required filling pressure of the gas spring.
The filling of a gas spring with 150 bar is not possible with a bottle pressure of 120 bar. The re-
maining nitrogen in the bottle remains unused or has to be used for other applications.
By using the nitrogen compact booster the entire volume of a nitrogen bottle can be used up the
residual pressure of approx. 30 bar.
The machine works according to the principle of a pressure intensifier. The low inlet pressure of
a nitrogen bottle is increased by continuous and constant piston motion. A high pressure is avail-
able at the outlet of the gas spring.
If using a bottle pressure regulator between nitrogen outlet and filling hose a maximum permis-
sible filling pressure can be set.
The machine is powered with pressurised air. The operating pressure is adjustable.
1.8
Warranty
The guarantee is regulated contractually (see Terms and Conditions or contract)
Instructions manual Nitrogen Compact Booster
9/38
Advertisement
Table of Contents
