10
DISASSEMBLY AND DISPOSAL
10.1
Important safety instructions
High pressure
Exiting pressure at the inlets can cause unexpected start-up if the machine is accidentally
switched on.
Before decommissioning, the machine has to be separated from the nitrogen bottle and the
The energy supply recovery can lead to injuries.
10.2
Disassembly
•
•
10.3
Disposal
10.3.1
Disposal of components
Dispose of assemblies correctly!
Incorrect disposal of assemblies can cause environmental damage and lead to prosecution.
In any case, the assemblies must be disposed of in accordance with the relevant national
Care must be taken to ensure the environmentally-friendly disposal of the process materials.
Local regulations for the correct recycling and disposal of waste must be adhered to.
Information about waste disposal sites and collecting point can be obtained from the local ad-
ministration.
The machine consists of:
•
•
•
•
30/38
WARNING!
pressurised air supply.
Decommission and shut down machine for good before disassembly (see chapter 9.3 "Final
decommissioning" on page 29).
Filter and control valve, bottle hose and pipes have to be unscrewed.
NOTICE
and regional laws and guidelines.
Iron / steel
Aluminium
Brass
Plastic
Disassembly and disposal
Instructions manual Nitrogen Compact Booster