1. Do not use the cable to pull the plug out of its socket. Protect the cable from heat, oil and sharp edges. PROXXON will not be liable for the safe function of the device for: Secure the tool. • handling that does not comply with the usual intended use, 1.
4. Arrange for damaged switches to be exchanged by a customer The DS 460 saws soft wood up to a thickness of 50 mm, plastic up to services workshop. 30 mm and non-ferrous metals up to 10 mm.
1. Fix the saw to a strong workbench with two screws (Ø 8 mm, not able for use with the DS 460. You must comply with the dimensions included). Use the holes (12, fig. 1) on the right and left in the specified in the technical data.
N.B.: Scroll saws are usually operated without a longitudinal stop because the saw blade “wanders” Our full range of suitable saw blades for your DS 460 can be found in when it is guided “by force” against a stop, especially in the grain of our Micromot catalogue or on the Internet under www.proxxon.com.
Please hold the workpiece on the saw table as shown in fig. 10. Adapt be done quickly and easily with the angle adjustment of your DS 460. the feeding to the material, the saw blade and the thickness of the workpiece! Hard materials, fine saw blades and thicker workpieces do 1.
27094 Repairs may only be carried out by qualified technical personnel or bet- ter still by the PROXXON Central Service! Never repair electrical parts In sole responsibility, we declare that this product conforms to the but always replace them with original PROXXON spare parts!
Spare Parts List PROXXON DS 460 ET - Nr.: Description ET - Nr.: Description...
Page 12
Service note All PROXXON products are thoroughly inspected after production. Should a defect occur nevertheless, please contact the dealer from whom you purchased the product. Only the dealer is responsible for handling all legal warranty claims which refer exclusively to material and manufacturer error.
Need help?
Do you have a question about the DS 460 and is the answer not in the manual?
Questions and answers