The Suspend/Resume button does not respond
properly
The system may be processing.
►
Wait until the system has completed processing.
You have not pressed the Suspend/Resume button long enough to switch off the notebook.
►
Press the Suspend/Resume button until the notebook switches off.
The Standby function has been deactivated in the BIOS Setup.
►
Enter the BIOS Setup by pressing F2 during system startup.
►
Activate the Standby function in the Power menu.
The radio connection to a network does not function
The ON/OFF switch for the wireless LAN/Bluetooth module is in the "OFF" position.
►
Switch the radio component on (see "Switching wireless LAN/ Bluetooth module on and off").
The ON/OFF switch for the wireless LAN/Bluetooth module is in the "ON" position.
Nevertheless, the radio connection to a network does not function.
►
Check whether the radio connection is switched on via the software.
Details are contained in the online help for your wireless LAN software and in the
i
"Wireless LAN" manual. The "Wireless LAN" manual can be found on the
"Drivers & Utilities" CD/DVD.
Detailed information on using Bluetooth is provided on the CD for your Bluetooth software
(e.g. the "Widcomm Software Suite" CD).
The mouse does not work
If the connected mouse does not work, the following can cause it:
Touchpad driver is not installed properly
►
Deinstall the touchpad driver.
►
Install the actual driver from the "Drivers & Utilities" CD/DVD.
Mouse driver is not loaded
►
Check whether the correct mouse driver is properly installed and is present before the
application programme is started.
Detailed information can be found in the User guides for the mouse or application programme.
A26391-K169-Z121-1-7619, edition 1
Troubleshooting and tips
107