The On/Off Switch Does Not Respond Properly; No Sound Or Minimal Volume; The Cd/Dvd Does Not Function; Contact With Hotline/Help Desk - Fujitsu Siemens Computers AMILO A Series Getting Started

The ON/OFF switch does not respond properly

The system may be processing.
► Wait until the system has completed processing.
You have not pressed the ON/OFF switch long enough to switch off the notebook.
► Press the ON/OFF switch for approx. 4 seconds.

No sound or minimal volume

Check that the hardware volume control is correctly set.
► Double-click on the volume indicator in the task bar and adjust the volume. Make sure that the
loudspeaker is not switched off here.
► Make sure that the sound driver is correctly installed under Control Panel - System - Device
Manager.
► Use the key combination Fn + F5 or Fn + F6 to check the volume.

The CD/DVD does not function

Check whether the CD/DVD has been properly inserted into the drive.
► Check whether the CD/DVD is scratched, warped, dirty or damp.
► Make sure that you use a CD/DVD that complies with the standards.
► Use the key combination Fn + F5 or Fn + F6 to check the volume.

Contact with hotline/help desk

If you are unable to solve a certain problem, please contact the hotline/help desk. The telephone
numbers are contained in the supplied help desk list. Please have the following information ready
when you call:
•
The model name and serial number of the notebook. The serial number is located on a sticker
on the underside of the notebook.
•
Notes of any messages that appear on the screen and information on acoustic signals.
•
Any changes you have made to the hardware or software after receiving the notebook.
•
Any changes you have made to the BIOS Setup Utility settings after receiving the notebook.
•
Your system configuration and all peripheral devices connected to your system.
•
Your sales contract.
10600416168
A Series
English - 9