The Lcd Screen Of The Notebook Remains Blank; The Lcd Screen Is Difficult To Read; The External Monitor Stays Blank - Fujitsu Siemens Computers CELSIUS Mobile H230 Operating Manual

The LCD screen of the notebook remains blank

If your LCD screen remains blank this may be due to the following:
LCD screen is switched off
► Press a key or enter the password
External monitor or television set connected
► In BIOS-Setup in the Advanced - Video Features menu set the Display Settings setting to Internal
Flat Panel.
The notebook has been configured to drive the external monitor
► Press the key combination Fn + F10 until you find the display option you require.

The LCD screen is difficult to read

If the LCD screen display is hard to read, it can be due to the following:
Reflection
► Turn the notebook or alter the tilt of the LCD screen.
Brightness control is set to dark
► Set the brightness control of the LCD screen to bright.
Incorrect screen resolution set
► Set the correct screen resolution.
Under Windows: Start - (Settings) - Control Panel - Display - Settings.
The correct monitor resolution for your notebook is specified in the corresponding section in the
chapter "Technical data".

The external monitor stays blank

If your screen remains blank this may be due to the following:
Monitor is switched off
► Switch the external monitor on.
Power saving has been activated (screen is blank)
► Press any key to continue.
Brightness control is set to dark
► Adjust the brightness control.
Screen output is set to the notebook's LCD screen
► Press the key combination Fn + F10 (selecting internal/external display).
A26391-K169-Z121-1-7619, edition 1
Troubleshooting and tips
103