Table of Contents
Advertisement
The ON/OFF button does not respond properly
ON/OFF button:
Cause
The system may be processing.
You have not pressed the ON/OFF button long
enough to switch off the notebook.
The Standby function has been deactivated in
the BIOS Setup.
The wireless connection to a network does not work
Radioconnectiondoesnotwork
Network,noradioconnection
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
Cause
The ON/OFF switch for the wireless
LAN/Bluetooth module is in the "OFF" position.
The ON/OFF switch for the wireless
LAN/Bluetooth module is in the "ON" position.
Despite this, the wireless connection to a
network cannot be established.
The mouse does not work
Touchpad:
Mouse doesnotwork
Mouse:nomousepointer
Cause
Mouse driver is not loaded
Mouse is not connected
A26391-K200-Z126-1-7619, edition 3
Troubleshooting
► Wait until the system has completed
processing.
► Press the ON/OFF button until the notebook
switches off.
► While the system is booting, press the
function key
F2
► Activate the Standby function in the Power
menu
Troubleshooting
► Switch your radio component on (refer to
the section entitled "Switching the radio
components on and off" in the EasyGuide).
► Check whether the radio connection is
switched on via the software.
► Check if the modules in BIOS are activated.
Troubleshooting
► Check whether the correct mouse driver is
properly installed and is present before the
application programme is started.
Detailed information can be found in the
User guides for the mouse or application
programme.
► Switch the notebook off.
► Check whether the mouse cable is correctly
connected to the notebook.
► If you use an adapter or extension lead with
the mouse cable, check the connections.
► Switch the notebook on.
Troubleshooting and tips
, to access the BIOS Setup.
53
Advertisement
Table of Contents
