Smartcards - Fujitsu Siemens Computers CELSIUS Mobile H230 Operating Manual

Security functions

SmartCards

SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for homebanking.
We recommend that you always use two SmartCards. Always keep one of the SmartCards in a safe
place if you carry the other SmartCard with you.
The SmartCard can only be used with a PIN so protection is maintained even when the
i
SmartCard is lost. The SICRYPT SmartCard, that is included in the "Mobile Secure IT
Suite", is locked after an incorrect PIN is input three times, to ensure maximum security for
you.
The first time you use your SmartCard you must enter the preset PIN provided by the
SmartCard manufacturer or your system administrator.
Inserting the SmartCard
Do not use force when inserting and removing the SmartCard.
!
Make sure that foreign objects do not fall into the SmartCard holder.
► Slide the SmartCard into the SmartCard reader with the chip facing upward and at the front.
When the SmartCard is properly inserted, it protrudes by approximately 1.5 cm.
74 A26391-K169-Z121-1-7619, edition 1