Fujitsu 420D User Manual page 76

S e c t i o n T h r e e
Supervisor Password is:
Su pervi s or Pa s s word is a display - on ly fiel d .
E n a bl ed is displayed wh en the sys tem su pervi-
s or password is set and Di s a bl ed wh en it is not.
User Password is:
User Password is a display-only field.Enabled
is displayed when the general user password
is set,and Disabled when it is not.
Set Supervisor Password:
This field allows you to set, change or cancel
the Supervisor Password. The Supervisor
Password must be seven characters long and
must include only lower-case letters or num-
bers. To cancel a password press the Enter key
instead of entering characters in the Enter
New Password field and in the Re-enter New
Password field.
Diskette Access:
This field allows the floppy disk access to be
secured by a Supervisor Password or a User
Password as you choose. If the chosen type of
password is set,it must be used to access data
on the floppy disk drive. If no password is set
68
for the selected type None will be required.
The default is User when the Superviser pass-
word is set.
Set User Password:
This field all ows you to set , ch a n ge or cancel the
Us er Pa s s word if the Su pervi s or Pa s s word is set .
The User Password must be seven characters
long and must include only lower-case letters or
numbers. To cancel a password press the Enter
key instead of entering characters in the Enter
New Password field and in the Re-enter New
Password field.
P O I N T
If you make an error when re-entering the
p a s s w o rd a [Wa rning] will be displayed on
the screen. To try again press the E n t e r k e y
and then retype the password. Press the E s c
key to abort the password setting pro c e s s .
Password on Boot:
When this field is set to Enable a password
(user or supervisor) is required after the
Power On Self Test before the Operating
System will be read from disk. When set
to Disabled no password is required. If
no Supervisor Password is set this feature
is not available and no password is required.
Password on Resume:
Wh en this field is set to Enabl ed you wi ll not
be able to re sume opera ti on from the Su s pen d
or Save - to - Disk Mode wi t h o ut en tering the
same password that was used wh en your
n o tebook power was tu rn ed on . Wh en it is
Di s a bl ed no password is requ i red . If n o
Su pervi s or Pa s s word is set , this fe a tu re is not
ava i l a bl e , the menu item is not vi s i ble and no
p a s s word is requ i red .
C A U T I O N
If the Password on Resume is Enabled
and the password on boot is Disabled you
will not be able to resume operation fro m
the Suspend or Save-to-Disk Modes.