Exiting From The Main Menu; Advanced Menu - Setting Device Controls - Fujitsu 420D User Manual

Exiting from the Main Menu

Wh en you have fin i s h ed set ting the para m eters
on this menu , you can ei t h er exit from the Setu p
Uti l i ty, or move to another menu . If you wish to
exit from the Setup Uti l i ty, press the E s c key or
use the curs or keys to go to the Exit Menu . If
you wish to move to another menu , use the cur-
s or keys . (See Navi ga ting T h rou gh The Setu p
Uti l i ty on pa ges 48–49 for more info rm a ti o n .)
Advanced Menu – Setting
Device Feature Controls
The Advanced Menu allows you to:
Set the I/O addresses for the serial port
and the parallel port.
Set the communication mode for the
parallel port.
Set audio function I/O addresses,interrupt
levels and DMA channel.
Select between the internal LCD display and
an external CRT display.
E n a ble or disable com pen s a ti on for the display.
Set the I/O address for PCIC.
C o n f i g u r i n g Y o u r L i f e B o o k 4 0 0 S e r i e s
Advanced Menu Fields
The Advanced Menu fields are:
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
Figure 3-3 Advanced Menu
Integrated Peripherals
Audio Features
Video Features
59