Exiting From The Power Savings Menu - Fujitsu 420D User Manual

customize the parameters you will be able to
set this yourself. The options available vary
from O , which has no inactivity shuto
times from 1 minute to 16 minutes.
Auto Suspend Time-out:
The auto-suspend time-out parameter is the
length of time without any I/O activity before
your notebook goes into Suspend Mode. If
you choose a factory combination of parame-
ters this field will display that setting. If you
choose to customize the parameters you will
be able to set this yourself. The options avail-
able vary from O , which has no inactivity
suspension, to times from 5 to 60 minutes.
Suspend Mode:
The Su s pend Mode field all ows you to ch oo s e
the form of su s pend state you wi s h . If yo u
ch oose Su s pen d , you wi ll su s pend opera ti on
with power to RA M , and everything else pow-
ered down or in a very low power state . If yo u
ch oose Save - to - Disk Mode your noteboo k
wi ll save all of RA M to the hard disk before
going to Su s pend Mode and tu rn o power to
the RAM while in the su s pen ded state .
C o n f i g u r i n g Y o u r L i f e B o o k 4 0 0 S e r i e s
P O I N T
to
When resuming from a Save-to-Disk
suspension there will be a delay while
the contents of RAM are loaded from
the hard disk.
C A U T I O N
In the Save-to-Disk Mode t h e re is no indica-
tion on the Status Indicator to let you know
you are suspended rather than shut off fro m
the Power Switch. You may want to make a
practice of always trying the Resume Button
b e f o re using the Power Switch.
Resume On Modem Ring:
Resume On Modem Ring sets whether or
not to Resume from the Suspend state when
a message is received by telephone line. This
feature is not available if the Save-to-Disk
Mode is enabled. This feature applies to
internal, external and PC Card modems.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
Resume On Time:
The Resume On Time field sets whether or
not to Resume from the Suspend state at
a designated time. This feature is available
from either the Suspend Mode or the
Save-to-Disk Mode.
Resume Time:
The Resume Time Sets the designated time,
on a 24-hour clock, when your notebook is
to automatically resume operation from the
Suspend state. The format of the clock setting
is hours:minutes:seconds.Each segment of
the time is set separately, either by incre-
menting or by typing in the numbers. You
move between the segments with the Tab key
or the Shift+Tab keys. This field does not
appear if Resume On Time is set to O .

Exiting from the Power Savings Menu

When you have finished setting the parameters
on the Power Savings Menu, you can either exit
from the Setup Utility or move to another
menu. If you wish to exit from Setup Utility
press the Esc key to go to the Exit Menu.
If you wish to move to another menu,use
the cursor keys.
71