4. Push the levers on the side of the docking
device toward the back so that the ejector
guides extend.
5. Carefully set your notebook on to the dock-
ing device so that the guides gently push into
the holes in the bottom of your notebook.
(See Figure 1-9 on page 8.)
6. Pull the levers forward until your notebook is
firmly latched in place.
7. Verify that the docking device connectors are
operational.Plugging in an external mouse to
the docking device and trying to move the
cursor with it is an easy test.
Installing Audio Input Devices
Make sure that the audio device,a cassette
recorder, for example,is equipped with an
(3.5 mm) stereo mini-plug. Make sure the plug
is aligned and push in until fully seated.
U s e r
I n s t a l l a b l e
Figure 4-11 Mini-Docking Station
C A U T I O N
This input is not designed for use with
microphones.
"
Installing Audio Output Devices
Make sure that the audio device,stereo head-
phones for example, is equipped with an
(3.5 mm) stereo mini-plug. Make sure the plug
is aligned and push in until fully seated.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
F e a t u r e s
"
89