Fujitsu 420D User Manual page 64

S e c t i o n T h r e e
Table 3-2 Options and Defaults for the IDE Adapter Submenu
Parameter Options
Autotype Fixed Disk: [Press Enter]
Type: Auto, None, 1–14,Rsrv,
16–39, User
*Cylinders: A number up to five digits.
*Head: A number between
1 and 16.
56
Default
Auto 1443 MB
When one of the preset combinations
is selected the value set is displayed but
cannot be changed from the screen. This
field can only be changed from the screen
when Type: is selected as User.
When one of the preset combinations
is selected the value set is displayed but
cannot be changed from the screen. This
field can only be changed from the screen
when Type: is selected as User.
Description
Allows you to activate a computer e ort to detect the
type of disk drive connected to the interface.
Allows you to configure the interface for almost any
hard drive. The numbers are 39 preset combinations
of parameters. Selecting User lets you set each para-
meter marked with * individually. Otherwise these
fields display the settings determined by the Type
Selection. The total memory capacity associated
with that selection is displayed to the right of
the option selected.
Sets the number of cylinders for the hard drive. This
field can be changed by incrementing or by typing in
the number followed by the Enter key.
Sets the number of heads on the hard drive. This field
can be changed by incrementing or by typing in the
number followed by the Enter key.