SMC Networks ProtoCessor FPC-ED2 Startup Manual page 3

Quick Start Guide
1. Record the information about the unit. (Section 2.1)
2. Connect the ProtoCessor FPC-ED2 3 pin RS-485 port to the field protocol cabling. (Section 3.1)
3. Connect a PC to the ProtoCessor via Ethernet cable. (Section 4)
4. Setup Web Server Security and login via web browser. (Section 5)
5. Configure the ProtoCessor to connect to the local network. (Section 6)
6. Integrate the ProtoCessor with the Grid or opt out. (Section 7.1)
7. Use a web browser to access the ProtoCessor Web Configurator page to enter any necessary device
information for the device attached to the ProtoCessor. (Section 8)
VorTek ProtoCessor Start-up Guide 3