Table of Contents
Advertisement
CCU
CONFIGURATION
Page name
Item
Page No.
<OTHERS>
BOARD SELECT
C18
SYNC OUT
CCU NO
ASSIGNABLE
CAM MENU
<ALARM SETTING>
FORCE LEGACY
C19
SUB REF NONE
SUB REF INVALID
NETWORK SETTINGS menu
NETWORK SETTINGS
Page name
Item
Page No.
<IP ADDR SET>
HOST IP ADDRESS
N01
SUB NET MASK
DEFAULT GATEWAY
SET
Settings
DRX1, DRX2, DRX3, DRX4, RC
EMBED AUDIO
ON, OFF
META DATA EMB OFF, ON
VIDEO PAYLOAD NEW, OLD
INTER LOCK
OFF, ON
SD SYNC, HD SYNC
0, 0 to 96, A to Z
NONE, BARS, CLEAN, CAM
POWER, FORCE LEGACY, REF
LOCAL HD, REF LOCAL SD
OFF, ON
OFF, ON
OFF, ON
OFF, ON
Settings
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.254
0.0.0.0 to 255.255.255.255
Description
Selects the board to set.
Sets superimposition of audio data to ON/OFF.
Sets superimposition of metadata to ON/OFF.
Sets the VIDEO ID.
SDI output (3, 4) format linking function
Sets the SYNC OUT connector.
Sets the CCU number.
Sets the function for the assignable button.
NONE: No assignment.
BARS: Sets the color bar output to ON/OFF.
CLEAN: Sets character superimposition for all
output slots to ON/OFF.
CAM POWER: Sets camera power to ON/OFF.
FORCE LEGACY: Forces the communication mode
to LEGACY mode.
REF LOCAL HD: Sets GENLOCK to LOCAL HD.
REF LOCAL SD: Sets GENLOCK to LOCAL SD.
Displays the Camera menu.
Notes
• If CAM MENU is set to ON, CCU
CONFIGURATION menu operations cannot be
performed because only Camera menu operations
are available.
• The Camera menu is not displayed when SD
signal is output.
Set to OFF to not display the FORCE LEGACY
alarm.
Set to OFF to not display the REF NONE alarm.
Sets to OFF to not display the REF INVALID alarm.
Description
Displays the IP address.
Displays the subnet mask.
Displays the default gateway.
A "SET OK?" message is displayed. Press ENTER
again to confirm the change. (Execute via ENTER.)
33
Setup Menu
Advertisement
Table of Contents
