Table of Contents
Advertisement
SYSTEM OPERATION
Page name
Page No.
<OUTPUT FORMAT>
S04
* Use the charts on the following as an example of how to configure these settings. The settings differ depending on the boards
connected to the expansion slots.
Slot1 1&2
Slot1 3&4
1080/50I
M1080/50I
An "M" next to the output format indicates that a cable's character will be output with the signal.
SYSTEM OPERATION
Page name
Page No.
<SD ASPECT>
S05
26
Setup Menu
Item
Settings
CAMERA TRANSMIT
1080/50I
SLOT1 (board name)
1&2
Output format*
3&4
Output format*
SLOT2 (board name)
1&2
Output format*
3&4
Output format*
SLOT3 (board name)
Output format*
SLOT4 (board name)
Output format*
SLOT5 (board name)
Output format*
SLOT6 (board name)
Output format*
Slot2 1&2
1080/50I
Item
Settings
SD ASPECT
SQUEEZE, EDGE CROP, LETTER
BOX
SD LB SEL
16:9, 15:9, 14:9, 13:9
H-POSITION
–99 to 99, (–99) to (99) 0
CENTER
ON, OFF, (ON), (OFF)
V-POSITION
–99 to 99, (–99) to (99) 0
CENTER
ON, OFF, (ON), (OFF)
H-INTERP
A, B, C, D, E
V-INTERP
A, B, C, D, E
Description
Displays the output format.
This setting works in conjunction with CAMERA
FORMAT.
Selects the output format for expansion slot 1's SDI
OUT1/2 connector.
Selects the output format for expansion slot 1's SDI
OUT3/4 connector.
Selects the output format for expansion slot 2's SDI
OUT1/2 connector.
Selects the output format for expansion slot 2's SDI
OUT3/4 connector.
Selects the output format for expansion slot 3's SDI
OUT connector.
Selects the output format for expansion slot 4's SDI
OUT connector.
Selects the output format for expansion slot 5's SDI
OUT connector.
Selects the output format for expansion slot 6's SDI
OUT connector.
Slot2 3&4
Slot3 1&2
M1080/50I
625/50I
Description
Selects the SD output aspect.
Selects the LETTER BOX aspect ratio.
Sets the horizontal position.
Settings in ( ): Displayed when SQUEEZE or
LETTER BOX is selected in SD ASPECT. (Display
only)
Sets the horizontal centering position.
Settings in ( ): Displayed when SQUEEZE or
LETTER BOX is selected in SD ASPECT. (Display
only)
Sets the vertical position.
Settings in ( ): Displayed when SQUEEZE or EDGE
CROP is selected in SD ASPECT. (Display only)
Sets the vertical centering position.
Settings in ( ): Displayed when SQUEEZE or EDGE
CROP is selected in SD ASPECT. (Display only)
Selects the down converter horizontal filter.
Selects the down converter vertical filter.
Slot3 3&4
Slot4
M625/50I
PAL
Advertisement
Table of Contents
