Connecting External Devices - TYAN S7103 Manual

2.11 Connecting External Devices

Connecting external devices to the motherboard is an easy task. The motherboard
supports a number of different interfaces through connecting peripherals. See the
following diagrams for the details.
NOTE:
1. Peripheral devices can be plugged straight into any of these ports
but software may be required to complete the installation.
2. LAN1 and LAN2 for 1G (GM2NR/WGM2NR/WGM4NR-2T-L2)
3. (2) 10G SFP+ for GM2NR-2T-L2/WGM2NR-2T-L2/WGM4NR-2T-
L2 only
Onboard LAN LED Color Definition
The three (3) onboard Ethernet ports have green and yellow LEDs to indicate LAN
status. The chart below illustrates the different LED states.
10/100/1000 Mbps LAN Link/Activity LED Scheme
10 Mbps
100 Mbps
1000 Mbps
No Link
Link
Active Blinking Green
Link
Active Blinking Green
Link
Active Blinking Green
http://www.tyan.com
Left LED
Green
Green
Green
Off
42
Right LED
Off
Off
Solid Green
Solid Green
Solid Yellow
Solid Yellow
Off