Connecting External Devices - TYAN S2932-E Manual

2.9 - Connecting External Devices

Your motherboard supports a number of different interfaces through connecting
peripherals. See the following diagrams for the details.
PS/2
Mouse/Keyboard
USB x 2
NOTE: Peripheral devices can be plugged straight into any of these ports but
software may be required to complete the installation.
Onboard LAN LED Color Definition
The three onboard Ethernet ports have green and yellow LEDs to indicate LAN
status. The chart below illustrates the different LED states.
10/100/1000 Mbps LAN Link/Activity LED Scheme
Link
10 Mbps
Active
Link
100 Mbps
Active
Link
1000 Mbps
Active
No Link
NOTE: In 10 Mbps, the Right LED blinks yellow once in repeat and continuous
action. In 100 Mbps, the Right LED blinks yellow twice in repeat and continuous
action. So does the condition in 1000 Mbps.
Serial Port
Left LED
Green
Blinking Green
Green
Blinking Green
Green
Blinking Green
Off
33
10/100/1000
LAN2 Port
VGAPort
Right LED
1 Blinking Yellow
1 Blinking Yellow
2 Blinking Yellow
2 Blinking Yellow
3 Blinking Yellow
3 Blinking Yellow
Off
10/100/1000
LAN1 Port