Indiana Furniture Tri-One Assembly Instruction

Training table t-leg fixed

Parts List:

Qty (2) Top Plates

Hardware Included



(24) #12 x 1" Pan Head Wood Screws



(8) ¼"-20 x ¾" Button Head Cap Screw



(8) ¼" Star Washers



(8) ¼"-20 x ¾" Flat Head Cap Screw



Qty (1) Work Surface

Tri-One Training Table

T-Leg Fixed

Assembly Instruction

Qty (1) Cross Beam

Qty (2) T-Legs

Tools Required



Drill with phillips screw bit



Allen Wrench

Table of Contents

Do you have a question about the Tri-One and is the answer not in the manual?

Page 1 Tri-One Training Table T-Leg Fixed Assembly Instruction Assembly Instruction Assembly Instruction Assembly Instruction Parts List: Qty (1) Cross Beam Qty (1) Work Surface Qty (2) Top Plates Qty (2) T-Legs Hardware Included Tools Required  (24) #12 x 1” Pan Head Wood Screws ...
Page 2 Tri-One Training Table Step 1: Using the (2) T-Legs, Cross Beam and the ¼”-20 x ¾” T-Leg Fixed Button Head Cap Screws assemble the Cross beam to the T-Legs. Assembly Instruction Assembly Instruction Assembly Instruction Assembly Instruction Step 2 :...
Page 3 Tri-One Training Table T-Leg Fixed Step 3 : Finally, fasten the work surface to the T-Leg assembly using the Qty(24) #12 x 1” Pan Head Wood Screws. Assembly Instruction Assembly Instruction Assembly Instruction Assembly Instruction There will be location holes for (4) of the Screws. Next Adjust the levelers if needed for leveling the work surface.