Page 1
Tri-One Training Table T-Leg Flip With Casters Assembly Instructions Parts List: Qty (1) Cross Beam Qty (1) Work Surface with Flip Mechanism Qty (4) Castors Qty (2) T-Legs Hardware Included Tools Required (14) #12 x 1” Pan Head Wood Screws ...
Page 2
Step 1: Using the (2) T-Legs, Cross Beam and the ¼”-20 x ¾” Button Head Cap Screws assemble the Cross beam to the T-Legs. Bolt Together Using ¼”-20 x ¾” Button Head Cap Screws (8) Places...
Page 3
Step 2 : Next, activate the flip mechanism by rotating the lever bar to rotate the top plates. Rotate Top Plates by hand Activate Flip Mechanism Step 3 : Next, Bolt the top plates on the legs with using the (8) ¼”-20 x ¾ Flat Head Cap Screw and the 5/32” Allen Wrench. Install Flat Head Cap Screws, (4) Per Leg...
Page 4
Step 4 : Now, tighten up the 8 screws in the latch plate going into the top. Tighten (4) Screws per side Step 5 : Next, using the provided #12 x 1” Pan Head Wood Screws install the remaining 14 screws in the Latch Plate Install the remaining screws...
Page 5
Step 6 : Screw the (4) Castors provided in to the T-Legs with a ½” Wrench. Next turn the table over and you are finished! Screw Castors in to the T-Leg...