Advertisement
Step 7
You will need
6 x Cam Bolts
Phillips head
screwdriver
(H2)
Attach 6 x Cam Bolts (H2) to Top Panel (P3) by tightening with the Phillips Head
Screwdriver.
Step 8
You will need
Phillips head
screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
Place the Steel Bar (P8) into the grooves of Left & Right Side Panels (P1&P2). Align the
Top Panel (P3) with Support Panel (P5) and Left & Right Side Panels (P1&P2) and
attach by tightening the 6 x Cam Nuts (H1).
fantasticfurniture.com.au
(H2)
(H2)
(P3)
(P1)
(H2)
(H2)
(P3)
(P2)
(P8)
(H2)
(H2)
(H3)
(H2)
(H1)
Page 9
Advertisement
