Epson XP-8700 Series User Manual page 71

Printing
>
Printing onto a CD/DVD Label
Important:
c
❏ Before printing on the CD/DVD, see the CD/DVD handling precautions.
❏ Do not insert the CD/DVD tray while the printer is operating. This may damage the printer.
❏ Start printing and insert the CD/DVD tray when you are instructed to do so. Otherwise, an error occurs and the
CD/DVD is ejected.
❏ Place a CD/DVD on the CD/DVD tray with the printable side facing up. Press the center of the CD/DVD to
securely set it on the CD/DVD tray. Otherwise, the CD/DVD may fall off the tray. Turn over the tray to check
that the CD/DVD is firmly secured in the tray.
❏ After printing is finished, make sure you remove the CD/DVD tray. If you do not remove the tray and turn the
printer on or off, or run head cleaning, the CD/DVD tray will strike the print head and may cause the printer to
malfunction.
Note:
❏ When you change the outer and inner diameter, select
Outer. Set the outer and inner diameter using
value in the frame and using the on-screen keypad.
You can set 114 to 120 mm as the outer diameter, and 18 to 46 mm as the inner diameter in 1 mm increments.
❏ The inner diameter and the outer diameter you set are restored to their defaults after printing the disc label. You can
change the defaults in Settings > Printer Settings > CD Inner/Outer.
❏ You may feel slight friction when inserting the tray into the printer. This is normal and you should continue to insert it
horizontally.
Related Information
"Menu Options for Printing from the Control Panel" on page 49
&
"CD/DVD Handling Precautions" on page 42
&
>
Printing Photos onto a CD/DVD Label
at the upper-right of the screen, and then select CD Inner/
, and then select OK. You can also set the diameter by selecting the
71