Epson XP-8500 Start Here

XP-8500 Small-in-One
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de configuración en español, consulte la Guía
de instalación en www.epson.com/support/xp8500sp (requiere una
conexión a Internet).
1
Unpack
Note:
• Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
• Do not throw away the protective material shown above. Tape this
piece to the top of the ink cartridge holder when transporting your
product. For more information, see the online User's Guide.
• The CD/DVD tray is stored in the bottom of cassette 2.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
3
Lower the scanner unit.
Printer
®
Protective
material
2
Turn on and configure
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2
Turn on the product, then adjust the control panel.
3
Select your language.
Note:
• You can change this setting later using the product's control
panel. For more information, see the online User's Guide.
• If an error message appears, turn off the product and check
that no protective material has been left inside the product.
3
Install ink cartridges
1
Lift up the scanner unit.
Caution: Do not touch the flat, white cable or the print head
path.
2
Unpack the ink cartridges.
Caution:
• Do not shake the ink cartridges.
• Do not touch the areas shown below. Doing so may prevent
normal operation and printing.