Table of Contents
Advertisement
No.
Parts
4
Drain Pump & Hose
2) Remove the 2 screws and separate the Drain
5
Fan & Motor
1) Remove the hex nut which is fixed to top of Fan
2) Remove the 3 hex nuts which is fixed to Motor
6
Temperature Sensor
1) Remove the 6 screws which is fixed to
2) Separates the Temperature Sensor which is fixed
Samsung Electronics
Procedure
Hose that is on the side lower part of Indoor
Unit (Use +Screw Driver)
and separate the Fan from the Motor.
(Use Monkey Spanner)
and separate the Motor from the Indoor Unit.
(Use Monkey Spanner)
Evaporator and separate the Partition.
to Evaporator Pipe with the fixing clip together
by the hand.
Disassembly and Reassembly
Remark
3-139
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
