PAC
- AM145FNPDBH1
No
Parts
1
Front View
2
ASS'Y INLET PART
3
ASS'Y MAIN PCB
PART
Samsung Electronics
Procedure
1) Stop the operation of the air conditioner
and disconnect the main power supply.
1) Open the ASS'Y INLET and separate the
safety clips.
(If there is a dust collector in the ASS'Y
INLET, separate the connector wire as well.)
1) Remove the 1 screw which is fixed to
COVER-MAIN PCB. (Use +Screw Driver)
2) Remove the 1 screw on the upper part
of GUIDE-BELL MOUTH and separate the
GUIDE-BELL MOUTH in a counter clockwise
direction. (Use +Screw Driver)
Remark
Direction of
disassembly
3-87