Table of Contents
Advertisement
No
Parts
6
ASS'Y EVAP PART
3-94
Procedure
1) Heat exchanger service is major
repairs service work.
2) First, collect all of the refrigerant to the
outdoor unit by a refrigerant recovery
operation and begin work.
3) Welding work qualification possession
worker works.
4) Always place a fire extinguisher in
preparation for an emergency.
1) Remove the high pressure pipe flare nut.
(Use Monkey Spanner)
2) Carefully separate the low pressure pipe
(9/8 inch) using gas welding machine.
Take care lest welding heat should go to
drain fan. (It is made of plastic.)
3) Remove the 4 screws from the upside of
heat exchanger. (Use +Screw Driver)
4) Remove the 4 screws from the right side of
heat exchanger cover. (Use +Screw Driver)
5) Remove the 4 screws from the left side of
heat exchanger cover. (Use +Screw Driver)
Remark
Samsung Electronics
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
