Adjusting Brush Height - Baker DeDuster M6 User Manual

Adjusting Brush Height

Ideal de-duster brush height is when the very tip of the brushes comes in contact with both
the top and bottom of the material being processed.
Note: Excessive and unnecessary brush wear will occur if the top or bottom de-dusting brush
is to close to the material being processed.
A solid steel shaft secures the top and bottom spiral brushes in their proper position.

To adjust the height of the bottom brush, loosen the jam nuts on each side (Figures 16B
& 16C) and raise or lower the bottom brush height by turning the height adjustment nut.
Use a measuring tape to ensure gap is equal on both sides. See Figure 16A for ideal
bottom brush height.

When proper bottom brush height is achieved, re-tighten the jam nuts on each side.
Figure 16B
Figure 16A
Baker M6 DeDuster - Rev 1,
Jam nuts Jam nuts Jam nuts Jam Nut
Bottom brush height Bottom brush height
adjustment nut adjustment nut
11/07; WWW.BAKER-ONLINE.COM
16
Figure 16
Figure 16C