De-Duster Chamber Access Hatch
Note: Follow proper Lockout / Tagout procedures prior to cleaning or performing
maintenance on any part of the machine.
Access the de-duster chamber by removing the four (4) nuts highlighted below, then
remove the hatch cover.
With the hatch cover removed you can clean around the brushes or remove jammed
material.
When done performing a task in or around the de-duster chamber, return the hatch cover
to its proper position and re-secure via the four (4) nuts highlighted below.
Complete a visual inspection to ensure all other guards/covers are in place and secure
prior to resuming operation.
Hatch cover
Baker M6 DeDuster - Rev 1,
Hatch cover nuts
Hatch cover nuts
Hatch cover nuts
Hatch cover nuts
(4) total
(4) total
(4) total
(4) total
11/07;
WWW.BAKER-ONLINE.COM
24
Figure 24