Clean Condenser Coil
Why
In order to maintain proper refrigeration performance, the condenser must be clean.
Time required
5 minutes to prepare
Time of day
At close
Hazard icons
Tools and supplies
Vacuum, wet/dry
Brush, wire
Procedure
1
Unplug unit power cord.
2
Remove exterior back with
5/16" nut driver.
3
Locate condenser on back of
unit.
4
Clean condenser.
Vacuum or wire brush dust
and particles from condenser.
Remove particles from
cabinet.
#9294285
15 minutes to complete
For 24-hour restaurants: during low-volume periods
5/16" Nut driver
5
©McDonald's Corporation · Planned Maintenance Manual · Revised June 2012
For factory assistance, call
888-436-5442
or 989-773-7981
Fax 888-779-2040
www.delfield.com
Delfield
™
Quarterly
Plug the unit power cord in.
®
RF 2 Q1
Page 1 of 1
Page 13