Table of Contents
Advertisement
Display lid switch board
Description
Display lid switch board (includes cable)
Before removing the display lid switch board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the display lid switch board:
1.
Turn the top cover upside down, with the front toward you.
2.
Disconnect the display lid switch cable (1) from the power button board.
3.
Release the display lid switch board cable from the clips (2) built into the top cover.
70
Chapter 4 Removal and replacement procedures
Battery on page
47), and then remove the following components:
Optical drive on page
Hard drive on page
51)
Keyboard on page
59)
Top cover on page
62)
48)
Spare part number
665603-001
Advertisement
Table of Contents
