Panasonic MX-XP101 Operating Instructions Manual page 14

When the tumbler base gasket need to be cleaned
Remove the tumbler base gasket from its base before cleaning.
Soak in warm water with diluted kitchen detergent. Wash it with a soft sponge,
rinse and dry them well. Attach it along the inboard edge of the tumbler base.
Detaching
Tumbler
base
gasket
Taking out from here
Using dishwasher and dish dryer
Safe / Unsafe
Lid
Lid gasket
Tumbler
(Black)
Use a detergent intended for use with a dishwasher.
●
Distance these items from the heating element, and set temperature to low if using
●
a model with heat control.
Attaching
● P ress the gasket firmly to prevent
the gap between the gasket and
the groove occurring or the gasket
bulge out.
Groove
[Cross section]
Tumbler base Tumbler base gasket
Press down to the bottom
until there is no gap.
Tumbler base
gasket
Motor housing
(Gray)
EN13