GE Biacore X100 Operating Instructions Manual page 52

5 Operation
5.2 Starting the instrument
Start the instrument from
standby
The instrument is normally left in standby mode which allows new runs to be started
quickly. Follow the steps below to start from standby.
Step
1
2
3
4
5
52
Action
Start Biacore X100 Control Software if it is not already running.
In the login-dialog, enter your user name and password and click OK. (Your
user name and password are provided by your Biacore X100 administrator.)
If you need to select a different database connection, click Options>>. The
default setup is This machine.
The software establishes connection with the instrument, which takes about
30 seconds.
Make sure that there is fresh buffer or water in the bottle on the left-hand
tray and that both buffer tubes are inserted into the bottle.
Make sure that the waste bottle on the right-hand tray is empty and the
waste tube is inserted in the bottle.
Biacore X100 Operating Instructions 28961142 AD